Page 27 of 27 FirstFirst ... 17252627
Results 521 to 540 of 540

Thread: A new "what are you doing in the loading room today" thread

  1. #521
    Brass Trader
    Join Date
    Aug 2016
    Posts
    14
    Feedback Score
    5 (100%)

    44 mag MP mold 240gr

    some I loaded this week for a friend. I have found them to be extremely accurate out of a model 29-2 three inch barrel.
    Attached Images Attached Images

  2. #522
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Unique is one of my favorite powders for my cast lead bullets. It seems to be accurate for a lot of different calibers I've tried. Examples are 357 mag, 44 mag and even 308 winchester. When it comes to 308 win between 13 and 15 grains using 130 to 150 grain cast lead bullets gives me very good accuracy using my TC Compass bolt gun.

    For 357 mag and 44 mag in a lever action you get decent velocity which usually increases the efficiency in terms of kinetic energy per grain of gun powder used. Many bottle neck calibers like 223 or 308 loaded with jacketed bullets pushing at or near their typical factory loadings for velocity only give you around 50 ft lbs muzzle energy per grain of gun powder used, but a 357 mag or 44 mag 16" carbine using unique powder can give you around 100 ft lbs muzzle energy per grain of gun powder. That's twice the kinetic efficiency.

  3. #523
    Brass Trader seeker's Avatar
    Join Date
    Jul 2013
    Posts
    36
    Feedback Score
    8 (100%)
    Quote Originally Posted by SafetyJoe View Post
    Finished sorting by head stamp a bunch of 38 special & 45acp brass that's listed on my trading post. Now I'm doing the final inspection on 8000+ pcs of nickel plated 40 s&w brass I'm wanting to get rid of.

    Seems like the public shooting range I go to has been very slow for activity this year. I'm thinking it's because of inflation and the bad economy. Most people don't have enough extra cash to spend on shooting guns. If I had to guess it seems like it's been about 50% less brass I've been getting this year.
    The only brass I have been finding is steel cases.
    The loading room...? I've been playing with 45-70 all summer. With the price of Varget at $59.99 the last time I visited the lgs, I've been working on more economical loads. I found data for pistol powders that shoot great. I have 3#s of Bullseye and I have 2 loads that shoot same POE. 12 grs. behind a 405gr. cast and 11.5 behind a 340 gr. cast. I have a lifetime supply of lead, I cast my own and I shoot my Henry a lot. I'm having a blast.

  4. #524
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Quote Originally Posted by seeker View Post
    The only brass I have been finding is steel cases.
    The loading room...? I've been playing with 45-70 all summer. With the price of Varget at $59.99 the last time I visited the lgs, I've been working on more economical loads. I found data for pistol powders that shoot great. I have 3#s of Bullseye and I have 2 loads that shoot same POE. 12 grs. behind a 405gr. cast and 11.5 behind a 340 gr. cast. I have a lifetime supply of lead, I cast my own and I shoot my Henry a lot. I'm having a blast.
    Yeah, I've pretty much been doing the same thing. Except I use the software program called quickload o my desktop computer to calculate the data for load data that can't be found published anywhere. If you give me the specifics for the bullets you use and the powders you have I can run the data in the program to see what it says. I need to know bullet weight, bullet length, case length, COAL, case capacity in terms of grains of water and barrel length.
    Results will look something like this 45-70 Govt - Bullseye - 405.jpg
    Last edited by SafetyJoe; 10-20-2023 at 08:19 AM.

  5. #525
    Brass Trader seeker's Avatar
    Join Date
    Jul 2013
    Posts
    36
    Feedback Score
    8 (100%)
    Quote Originally Posted by SafetyJoe View Post
    Yeah, I've pretty much been doing the same thing. Except I use the software program called quickload o my desktop computer to calculate the data for load data that can't be found published anywhere. If you give me the specifics for the bullets you use and the powders you have I can run the data in the program to see what it says. I need to know bullet weight, bullet length, case length, COAL, case capacity in terms of grains of water and barrel length.
    Results will look something like this 45-70 Govt - Bullseye - 405.jpg
    Much appreciated.
    Bullet weight- 425gr. RCBS 45-405-FN coww
    Bullet length-1.0725
    case length-2.0920
    COAL- 2.51
    Case capacity- 77.5 gr. water
    Barrel length- 18.43"


    Bullet weight-347gr. Lee 457-340-F
    Bullet length- 0.8735
    Case length- 2.0920
    COAL2.5270
    Case capacity- 77.5gr. water
    Barrel length-18.43"
    Thanks a lot, I sure do appreciate this. Have a great evening. G.

  6. #526
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Besides Bullseye powder what other powders do you want to try?


    With the RCBS bullet 11.5 grains is the beginning of the yellow zone for pressure at 21,273psi. 12.4 grains is the beginning of the purple pressure zone. 13.6 grains is the max charge at 27,903 psi.

    Here's what the 12.4 grains looks like
    45-70 Govt - Bullseye - 425.jpg

    With the Lee bullet 13.6 grains is the beginning of the yellow zone for pressure at 21,129psi. 14.7 grains puts you at the beginning of the purple pressure zone. 16.1 grains is the max charge at 27,812psi.

    Here's what the 14.7 grains looks like.
    45-70 Govt - Bullseye - 347.jpg

    Not sure why the 14.6 grain chart is still showing up below in this post after I deleted it so just ignore that one.
    Attached Images Attached Images
    Last edited by SafetyJoe; 10-24-2023 at 03:19 PM.

  7. #527
    Moderator
    Join Date
    Feb 2013
    Posts
    354
    Feedback Score
    44 (100%)
    BE 86, a great 10mm powder.

  8. #528
    Brass Trader seeker's Avatar
    Join Date
    Jul 2013
    Posts
    36
    Feedback Score
    8 (100%)
    Quote Originally Posted by SafetyJoe View Post
    Besides Bullseye powder what other powders do you want to try?


    With the RCBS bullet 11.5 grains is the beginning of the yellow zone for pressure at 21,273psi. 12.4 grains is the beginning of the purple pressure zone. 13.6 grains is the max charge at 27,903 psi.

    Here's what the 12.4 grains looks like
    45-70 Govt - Bullseye - 425.jpg

    With the Lee bullet 13.6 grains is the beginning of the yellow zone for pressure at 21,129psi. 14.7 grains puts you at the beginning of the purple pressure zone. 16.1 grains is the max charge at 27,812psi.

    Here's what the 14.7 grains looks like.
    45-70 Govt - Bullseye - 347.jpg

    Not sure why the 14.6 grain chart is still showing up below in this post after I deleted it so just ignore that one.
    Much appreciated Safety Joe. Excuse my ignorance but can you please explain "Yellow Zone" and "Purple Zone" I'm thinking start and mid range loads? Bullseye is working real well. I have lots of pistol powders but the only other one I have been curious about is BE-86, which really doesn't have much data outside of Alliant's published data. Even that doesn't have much variance. I like it for 45 Colt but my go to 45 colt powder is 2400. I have a couple of pounds BE-86 in the cupboard and haven't touched it in awhile.

  9. #529
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Quote Originally Posted by seeker View Post
    Much appreciated Safety Joe. Excuse my ignorance but can you please explain "Yellow Zone" and "Purple Zone" I'm thinking start and mid range loads? Bullseye is working real well. I have lots of pistol powders but the only other one I have been curious about is BE-86, which really doesn't have much data outside of Alliant's published data. Even that doesn't have much variance. I like it for 45 Colt but my go to 45 colt powder is 2400. I have a couple of pounds BE-86 in the cupboard and haven't touched it in awhile.
    Yeah, starting loads are in the beginning of the yellow zone, purple is mid range and red is the no go above max pressure zone. BE-86 isn't one of the powders listed in quickload. There's a few other powders they don't list like 700x and 800x because the variations from one lot of powder to the next is too much for them to consider it consistent so they don't list those powders. Maybe that's the case with BE-86 or maybe it's not listed because my version of quickload is an older version that came out before BE-86 was introduced.

  10. #530
    Brass Trader
    Join Date
    Dec 2016
    Posts
    337
    Feedback Score
    8 (100%)
    I started the day by shooting my muzzle loader and then cleaning it. Then I had my youngest Son and 2 of the Grandsons over to load them some 308's for the up-coming Deer Season.

    Its good to see you guys posting!

  11. #531
    Brass Trader seeker's Avatar
    Join Date
    Jul 2013
    Posts
    36
    Feedback Score
    8 (100%)
    Quote Originally Posted by SafetyJoe View Post
    Yeah, starting loads are in the beginning of the yellow zone, purple is mid range and red is the no go above max pressure zone. BE-86 isn't one of the powders listed in quickload. There's a few other powders they don't list like 700x and 800x because the variations from one lot of powder to the next is too much for them to consider it consistent so they don't list those powders. Maybe that's the case with BE-86 or maybe it's not listed because my version of quickload is an older version that came out before BE-86 was introduced.
    That's probably it. I'm really happy with these Bullseye loads. Not only because they are so accurate but I have 3 pounds of the stuff and I can get a lot more bang for my buck than I can with rifle powder at what it costs these days. Best to you. G.

  12. #532
    Brass Trader
    Join Date
    Dec 2016
    Posts
    337
    Feedback Score
    8 (100%)
    A buddy and I made the rounds of most of the local shooting places last week and picked up some brass. But not as much as I expected. I guess the cost of ammo has peoples shooting slowed down.

    Most of this brass had been wet and had lots of grass and stuff stuck to it. So I started out washing it, then drying it, then depriming it.

    I'll tumble it after the 1st of the year and make some additions to my trade list!

  13. #533
    Brass Trader Jungle Dave's Avatar
    Join Date
    Dec 2023
    Posts
    2
    Feedback Score
    0
    Starting out today just finding this forum and looking through it. Glad to find it. Next, I'll get in gear and size/lube about 150 405gr HB for .45-70....then vacuum....or vacuum first and then....oh well...

  14. #534
    Moderator
    Join Date
    Feb 2013
    Posts
    354
    Feedback Score
    44 (100%)
    Quote Originally Posted by Jungle Dave View Post
    Starting out today just finding this forum and looking through it. Glad to find it. Next, I'll get in gear and size/lube about 150 405gr HB for .45-70....then vacuum....or vacuum first and then....oh well...
    Welcome to the forum.

  15. #535
    Brass Trader
    Join Date
    Dec 2016
    Posts
    337
    Feedback Score
    8 (100%)
    Welcome Aboard, Dave! Feel free to join right in!

  16. #536
    Brass Trader seeker's Avatar
    Join Date
    Jul 2013
    Posts
    36
    Feedback Score
    8 (100%)
    Welcome to the forum. I'd sure like to see activity here get to where it used to be.
    Last edited by seeker; 01-29-2024 at 03:36 PM.

  17. #537
    Brass Trader
    Join Date
    Dec 2016
    Posts
    337
    Feedback Score
    8 (100%)
    I started yesterday morning tumbling last years range brass. Did 4 loads, 2 hours each, yesterday and I'm on the 3rd load for today. Hoping to finish tomorrow or Monday.

    Maybe by next week I will have some additions to my trade page!

  18. #538
    Brass Trader
    Join Date
    Feb 2013
    Posts
    33
    Feedback Score
    1 (100%)
    I just finished prepping and priming 1,000 pcs of WMA 5.56 brass.

    I'm only going to the Range now to pick up brass about every 2 weeks but I'm still usually finding what I consider a "Fair" amount there when I go. I use those plastic buckets that Deckmate packages their 25#'s of Deck screws. They're square and have extremely stiff sides so that when I'm kneeling on the ground picking up brass, I can use the bucket to stand up (with my bad knees, back, and shoulders it's getting tougher and tougher to pick up brass, especially since getting off of my Pain Meds, LOL). This last time, I ended up with 2 of those plastic buckets full, so about 50# of mixed brass. LOTS of .223/5.56 and 9mm but sadly, no Weatherby Calibers. Someone(s) at Our Range has taken up shooting .300 PRC, 7mm PRC, and 6.5 mm PRC and they are leaving their brass, so I'm figuring that they must not reload.

    I'm in the middle of swapping out the 4' Fluorescent light fixtures in my reloading room to 8' LED's. I've been needing to get better lighting in there and had been trying to figure out how to add lights, then my Son told me about some 8' LED's he'd found on Amazon. Since my Fluorescent Fixtures are already paid for and I have plenty of 4' tubes, I started to not go with the LED's and just add a couple of more 4' fixtures.....That's until I found out what 4' fixtures are going for these days! Not to mention that the LED's use less power and put out way more light.

  19. #539
    Brass Trader
    Join Date
    Dec 2016
    Posts
    337
    Feedback Score
    8 (100%)
    I used to get the square buckets that Grain Bin Bolts came it. Heavy plastic like you have. But I don't wire Grain Bins anymore!

  20. #540
    Brass Trader
    Join Date
    Feb 2013
    Posts
    79
    Feedback Score
    2 (100%)
    I'm sure many of us have tried Servicios y Aventuras Small Pistol Primers? I've noticed a problem with striker fired pistols. I'm getting light primer strikes (FTF). When I take the same round and put it in a 1911 (hammer fired) it goes off every time. So the next time I went to the range I took some retail rounds and some reloads with CCI primers to try in the pistol in question. There were no FTF with the pistol that was experiencing problems with the SA prrimers. Anyone have any issues with these primers and a striker fired pistol? I've been considering replacing the striker to see this addresses the issue. I've already replaced the springs, but this did not help. Thoughts?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check