Back to the top
Back to the top
Another day another reloading opportunity.
Still uniforming the flash holes in some 6.5cm brass
I decided to do some primer pocket and flash uniforming on 308 and 6.5 Creedmoor.
I am going to the range as it is sunny but cold out. I should have lots of brass to process.
I have lots of brass now to process.
Had a local guy contact me and said he's been accumulating brass for 30 years and his dad has been for even longer. He said he has several 55 gal drums full of brass he wants to sell me so I'm looking forward to that deal. I'll probably be very busy this summer cleaning brass and adding it to my list.
Congrats on the deal!
Started some Grendel for match loads.
SafetyJoe, I hope that deal works out for you. Good Luck
Still working on the Grendel brass.
I finally got rid of all the 9mm, 223 and 40sw and also some more 308 win brass.
I added this to my trading post today.
imagegfjgjdgh.jpg
I also have range scrap lead ingots available.
Corn cob shaped and lyman ingots
Lead was fluxed and is very clean
BNH varies, but is plenty hard for handgun bullet casting
You have been busy.
Loaded some 308 today for a recently completed build. Lapua brass, Federal 210M primer, IMR4064 and a Sierra ProHunter bullet.
A few days ago I pulled all of my jacketed bullets off of 3 out of 4 shelves to inventory. Today I'll make a list as I stack them back.
Sold 100 lbs of range scrap ingots to a couple local guys today. I still have 500-600 lbs left to get rid of. I also have more 38 special brass than I'll probably ever use so I was thinking about going through what I have and adding some to my list. I finally finished uniforming the flash holes in the 6.5cm brass yesterday.
I did some 30 Carbine and 45 ACP.
Headed to the range, I will have 45 Colt, 380 and 10mm to process when I get back.
Back to the top.
And here we go again.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |