My Trades -- SafetyJoe

[SafetyJoe]

I finally decided against reloading 10mm so I added to my list the 10mm brass I've accumulated over the past few years. Non of the brass was ever reloaded by myself.

I never ended up buying any guns chambered in 10mm and because I already load 400 corbon I don't really see a need to start reloading 10mm. So that's why I'm wanting to trade away the 10mm brass I've accumulated.

[SafetyJoe]

I sorted the 10mm by head stamp

[billfisher]

Thank you so much. Great job

[SafetyJoe]

No, problem. You're welcome

Thank you so much. Great job

[SafetyJoe]

I updated my list of totals and added some bullets to my list.

[SafetyJoe]

I added some 223 brass to my list

(- edit - Sorry all the 223 brass is gone now. )

[vertix]

I have what is listed below:

--CLEANED, BUT NOT DEPRIMED--
(2500) 380 ACP
(1500) 9mm Mixed HS
(1210) 45 ACP Small Primer
(1000) 40 S&W
(67) 222 Remington
(52) 22 Hornet
(28) 45 Colt
(20) 204 Ruger
(12) 454 Casull
(12) 500 S&W Special
(4) 460 Rowland

--DEPRIMED & CLEANED--
(3307) 10mm AUTO
(407) 38 Super
(323) 30 Carbine
(150) 32 ACP
(125) 30-30 Win
(105) 30-06 SPRG
(53) 222 Remington
(48) 45 G.A.P.
(46) 38 S&W Short
(42) 270 Win
(41) 303 British
(39) 7mm-08
(38) 30-30 Win Nickel Plated
(26) 7.62x25mm Tokarev boxer primed
(17) 30 Mauser
(14) 38 Long Colt
(12) 308 Marlin Express
(12) 9x21mm
(10) 7.62x38mmR boxer primed
(10) 300 H&H MAG
(8) 300 Win Mag
(7) 8mm Mauser
(6) 243 Win
(6) 6.8 SPC
(4) 9mm Makarov
(4) 32 S&W Long
(2) 45-70 GOVT
(1) 460 S&W Mag
(1) 35 Remington
(1) 7mm Mauser
(1) 7.62X54r
(1) 22 TCM

---- Head Stamps Listed Below ----

--DEPRIMED & CLEANED--
(734) 10MM CBC HS
(428) 10MM S&B HS
(343) 10MM Sig HS
(341) 10MM Federal NT HS
(316) 10MM Hornady HS
(267) 10MM X-Treme HS
(251) 10MM Armscor HS
(117) 10MM Winchester HS
(103) 10MM PMC HS
(101) 10MM Blazer HS
(89) 10MM PPU HS
(78) 10MM Underwood HS
(47) 10MM Nickel Plated Mixed HS
(34) 10MM Herter's HS
(32) 10MM Misc HS
(26) 10MM Starline HS

I'm wanting to trade these reloadable brass cases. I'm looking for 44 Magnum & boxer primed 7.62x39 brass that are in good condition. Good condition means the brass is not cracked, heavily dented, corroded or tarnished and can be reloaded several times. With that being said, once fired brass is still preferred.

Most of my brass has been deprimed and wet tumbled clean with stainless steel pins. Uncleaned brass or brass that hasn't been deprimed will be listed separately.

Some calibers have been sorted by head stamp. Lists of head stamps will be at the bottom.

Trades should be large enough to use a padded flat rate USPS envelope, but larger trades using a medium or large flat rate USPS box are preferred even more. Some consideration might be made for calibers I don't have much quantity of.

HS is an abbreviation for " Head Stamp "

I have 44 mag brass.I am looking for 45 long colt

[vertix]

I have 44 mag brass.I am looking for 45 long colt

also would like 22 hornet could use some hornady 10mm.How about a trade.I have 190 rds of the 44 mag brass at least 100 are once firied also have a good number of 7.62x39

[SafetyJoe]

Updated my totals

[SafetyJoe]

I added some 45 acp to my list

[renofish]

I have an abundance of once fired deprimed and cleaned 38 special, 357 mag, 44 magnum and 500 S&W (new) brass for trade.
I am looking for 100+ pieces of 243 Winchester brass new or once fired.

Thanks,
Richard Reno

[renofish]

I have an abundance of once fired deprimed and cleaned 38 special, 357 mag, 44 magnum and 500 S&W (new) brass for trade.
I am looking for 100+ pieces of 243 Winchester brass new or once fired.

Thanks,
Richard Reno

[renofish]

I'm interested in your 243 brass unsized. if sized then not interested

[SafetyJoe]

I don't have any 243 brass right now. Sorry

I'm interested in your 243 brass unsized. if sized then not interested

[SafetyJoe]

I updated my list and will be adding some 223, 9mm, 380 acp, 45 acp and a few 45 Colt soon. I just need to finish wet tumbling them clean and sorting / inspecting them.

[curt48mauser]

Hi SafetyJoe,

I have some larger Berdan primed 7.62 x 54r, brass that I saw you posting for back in 2019. I have about 1 of the larger USPS boxes that are either still with their original primers, some deprimed with the cam over claw punch but it was dinging the center brass anvil. If you are interested in some level of swapping .40 cal brass or even the small primered .45 acp, let me know.
Thanks
curt48mauser
P.S. I will start watching this site closer, but it may be a 1-2 day reply lapse.

[SafetyJoe]

Yeah, sorry I can't use those anymore. I used to know someone who loaded dummy rounds for military museums, but he's no longer doing that anymore.

Hi SafetyJoe,

I have some larger Berdan primed 7.62 x 54r, brass that I saw you posting for back in 2019. I have about 1 of the larger USPS boxes that are either still with their original primers, some deprimed with the cam over claw punch but it was dinging the center brass anvil. If you are interested in some level of swapping .40 cal brass or even the small primered .45 acp, let me know.
Thanks
curt48mauser
P.S. I will start watching this site closer, but it may be a 1-2 day reply lapse.

[curt48mauser]

OK, thanks. It was a long-shot.

Curt

[SafetyJoe]

I updated my list. Added a bunch of 308 win.

[SafetyJoe]

For a short time I'm considering accepting other calibers like 38/357 mag for trades. However, the trade ratio will be leaning in my favor because I already have a lot of 38/357 mag brass. So if there's something on my list you want and you're sitting on a bunch of 38/357 mag brass that you don't want maybe we can work something out for a trade.
Thank you