My Trades -- SafetyJoe

[gandog56]

Would you trade me 200 nickel plated .357 mag for 150 10mm?

[SafetyJoe]

Yeah sure, but that isn't very much so the shipping charges make too big of a difference. Why don't you wait until I update my list in a few days because you might see something else you'll want along with the 357 mag which might be enough to make it worth the shipping. Thanks

Would you trade me 200 nickel plated .357 mag for 150 10mm?

[HARDSHOOTER]

i'm not too sure if i like the idea of trading pound for pound because some calibers have a much higher value than others. If we were only trading stuff like 9mm and 40 s&w then it might be a good idea. I'm a little too ocd about some things and counting brass is one of them.

Edit: However, none of that is to say weighing brass to determine the approximate count is a bad idea. I did that to the 45 acp and 380 acp brass i have that's listed. I just don't think trading based 1 lb of brass for 1 lb of brass will always be fair.

Hey Joe. I have several hundred 7.62x39 boxer primed polished brass to trade for your 50ae and 30 carbine for starters. Not that steel russian berdan primed stuff. I might want some 44 mag and 357 mag if you still have some.
How does one for one trade for your brass against my 7.62x39 sound to you?

[SafetyJoe]

Yeah that might be fine. I'm a little busy right now so my updated list will take another day or two. Be careful with the brass 7.62x39 because some of that stuff is still berdan primed even though it's not steel cased.

Hey Joe. I have several hundred 7.62x39 boxer primed polished brass to trade for your 50ae and 30 carbine for starters. Not that steel russian berdan primed stuff. I might want some 44 mag and 357 mag if you still have some.
How does one for one trade for your brass against my 7.62x39 sound to you?

[Danth]

How many HXP 30-06 cases do you have with the same year headstamp?
'

[SafetyJoe]

Not sure, but I'll check today

How many HXP 30-06 cases do you have with the same year headstamp?
'

[SafetyJoe]

51 pieces of 30-06 HXP from 1977. The #2 most common I have is 15 pieces from 1978

How many HXP 30-06 cases do you have with the same year headstamp?
'

[SafetyJoe]

Okay, I finally updated my list even though I still have a few others to add. Namely some more 303 British, 300 Savage, nickel plated 357 mag and a few others, but I'll do that in a few days after I finish wet tumbling and counting them after they are dry.

[SafetyJoe]

Added some 223 brass to my list.

[gandog56]

I want to make a deal for your 51 pieces of Greek HXP 30-06 marked 77. I want all your 7.7 Jap. and all your .44 special. I have 7.62X539 and 10mm to trade, PM Me if u=interested.

[SafetyJoe]

I updated my totals

[gandog56]

Well, I have a crappile of 10mm Auto, brass and Nickel plated. I am interested in your 7.7 Jap and .303 Brit. PM me with a trade ratio.

[SafetyJoe]

Updated my totals and list of things I want.

[SafetyJoe]

I updated my totals and list of calibers I want.

Merry Christmas and Happy New Year everyone.

[cowboybart]

I have an RCBS Turret press that I want to part with. Not a lot on your list that I can use. Got any AI or other wildcat dies ?? Scopes? Dan Wesson 357 or 44 barrels??

[SafetyJoe]

I have an RCBS Turret press that I want to part with. Not a lot on your list that I can use. Got any AI or other wildcat dies ?? Scopes? Dan Wesson 357 or 44 barrels??

Nope, sorry. Don't have much of anything like that. Thanks for the consideration. I'm actually leaning more towards the new 8 station turret press from lyman anyway. Merry Christmas

[SafetyJoe]

I updated my list with some uncleaned brass that will probably end up getting wet tumbled clean soon.

[don3]

I have the following listed else where plus several sets of dies for sale and some brass [300 0r 400 nickle 380 brass] plus others. If any of this is of intrest to you let me know and we'll work something out. I'm having a hard time with PM and other stuff on here so if you want you can E=mail me.
Don


RCBS 375 expander die=
RCBS 40-65 Win. expander die=
Unknow .454 expander die=
Lyman bullet sizing dies for sizer/ luber;
.401=
.308=

[SafetyJoe]

What brass on my list are you interested in for the nickel plated 380 acp you have? I'm only looking for that nickel 380 acp for a friend so it's not something I personally want to buy. Plus selling anything on this site isn't allowed last time I checked, but I'm open to hearing your trade offers.

I have the following listed else where plus several sets of dies for sale and some brass [300 0r 400 nickle 380 brass] plus others. If any of this is of intrest to you let me know and we'll work something out. I'm having a hard time with PM and other stuff on here so if you want you can E=mail me.
Don

[don3]

Was not trying to sell, just let you know what I have, if interested I will trade. Will get back to you with count of 380 and what I'm looking for. Also have list of brass I have posted on forum.