A new "what are you doing in the loading room today" thread

[b2lee]

Joe,

I'm using the Dillon Super Swage...I really...I mean really love it mounted to my work bench using the Inline Fabrication flush mount system. I probably own most of the primer pocket swage-ing systems/devices...but the Dillon Super Swage is my favorite by far.

[SafetyJoe]

Yeah, I use the Dillon Super Swage too and I also have the inline fabrication mount for it, but I don't use the flush mount. I'm tempted to try the adapter for the hornady LNL press because it looks like it might work pretty good too.

110745041217_swage_plate.2fdf065c.jpg

Joe,

I'm using the Dillon Super Swage...I really...I mean really love it mounted to my work bench using the Inline Fabrication flush mount system. I probably own most of the primer pocket swage-ing systems/devices...but the Dillon Super Swage is my favorite by far.

[b2lee]

Joe, maybe I'll put that on my list of things to buy and play with. However, besides saving money to build a 300 Norma Mag...and probably a Vortex Razor HD Gen II on top....I'm literally salivating over the AMP Mark II Annealer with the AMPMate auto feed system. Maybe I should ask for a raise at work..because 2019 is already shaping up to be an expensive year for my shooting hobbies.

Maybe in the near future I can come on this thread and say...'yea...annealed 1000 5.56 and 1000 .308 while eating a sandwich'.

Lee

[WarEagleEd]

I was out of the country for a while and am now back home. I'm unboxing some things that I bought online while I was away. This morning (because I woke up early and couldn't go back to sleep) I unboxed the RCBS APS hand primer and APS strip loader that I purchased off of ebay a couple of months ago. There were no instructions included in either item (though they both have their original boxes), but these can be downloaded from the RCBS website.

[Mbaker78]

I was out of the country for a while and am now back home. I'm unboxing some things that I bought online while I was away. This morning (because I woke up early and couldn't go back to sleep) I unboxed the RCBS APS hand primer and APS strip loader that I purchased off of ebay a couple of months ago. There were no instructions included in either item (though they both have their original boxes), but these can be downloaded from the RCBS website.

I think you’ll like the strips, so much easier to guarantee they’re not upside down or sideways.

[Mbaker78]

I tried the super swage and didn’t like it. I don’t separate by headstamp, so I would overswage some and underswage others. Since switching to a Lyman reamer and cordless drill I haven’t had any issues and it’s probably just as fast.

[lightman]

Just started sorting through 2 boxes of range brass that a buddy dropped off. Each box is about the size of a medium flat rate box and a lot of it looks to be rifle brass. So, I have something to do next week when it turns cold again!

[WarEagleEd]

Unboxed a new Redding T7 turret press that I bought from Brownells back in the first part of December. They had it on sale for $249.99 and free shipping on orders over $49. The press is quite hefty. It came with a VihtaVuori, Western, and basic Hodgdon reloading guide. Whenever I get the chance I'll set it up on my bench and try it out.

[lightman]

Just finished sorting 2 medium flat rate size boxes of brass. Deprimed and tumbled a load for a trade.

[Pacomdiver]

i bought the dillon 600 swager about 6 years ago, i used it for about 100 cases just for testing a new load, then tried to prime them, some primers fell out after seating. thats when i reread the instructions that you have to seperate brass by stamp, so back in the box it went and sent to the shelf of denial. got the rcbs press swager and havent looked back. i just found it last week transfering stuff from my old multiple benches to my new monster bench

[lightman]

I thought I was the only one that didn't care for the Dillon tool. A buddy was borrowing a tool from me for a while and he also preferred my RCBS tool over the Dillon. Most of the time I use a 45º counter sink and a cordless drill.

[b2lee]

Well...the weather man says a high of 6F today here in N. KY.....and I think we hit that already...with a low of -1F...wind chills around -40F or so....if I'm not mistaken...that is about perfect weather to pour some lead. Probably crank out some 300BO, 45ACP, 40S&W, 9mm projectiles and powder coat them...and maybe drop some 224 cores....see if I can get through 100lbs of lead today before I get bored/tired.

Oh..and I won't be directly outdoors doing this...and definitely not in the wind...I'm sure the propane heater and blower and lead pot will keep me warm enough.

[WarEagleEd]

I fooled around with the APS hand primer to see how it functions. I discovered that the strips only go in one way, if the tool is going to function properly. I also discovered that the small primer plug was not included nor the little tool necessary to remove one plug and install the other. I called RCBS and they are sending me the missing parts for free even though I told them that I had purchased the priming tool used. I have finally had an opportunity to experience that legendary RCBS customer service and I was not displeased.

[Mbaker78]

I have finally had an opportunity to experience that legendary RCBS customer service and I was not displeased.

I had a pack of strips that wouldn’t properly hold primers, maybe 4 of 8 strips were bad, they sent me a whole new pack of 8 strips.

As far as the strips being directional, mine has a sticker that shows the feed direction (“female” end first).

Over the last couple weeks I loaded up the last of my .40 cal xtreme bullets, deprimed/reamed and tumbled all of my 223/5.56, and deprimed the rest of my 300aac.

Tweaked the loadmaster and got it running pretty smoothly. It’s not a bad machine, but some of the additional features are a bit wonky, like the case feeder and priming system (I hand prime off press, so that’s not an issue).overall it’s not too bad for the $100 I spent on it.

[lightman]

Planning on resizing a batch of 9mm brass, about 800 or so. Probably run a few batches of rifle brass through the tumbler before the Super Bowl game.

[Pacomdiver]

im gonna size at least 1k of the lee 120 tc that i have cast up so far, more if i dont get tired and maybe powder coat them

[Pacomdiver]

i sized a whole #10 can full of the 120 tc bullets to 356, and powder coated about 1100 of them, still have about 550 left to coat

[b2lee]

Today, I arrived at a place I haven't been at in over 10 years. I finished loading about 300 5.56, 12 9mm, 10 45ACP, and 1 8mm Mauser.....and now I have ZERO brass available for reloading. I mailed out my last available trade today and don't even have anything to trade at the moment...however...I guess I'll take down some 270Win, 338WM, and 44spl to have some brass and bullets to trade.

[lightman]

I just acquired 2 20mm ammo cans of odd 9mm brass that I'll start depriming and tumbling. I expect that there will be 380's and 9X18's mixed in as well. This should keep me off the streets for a while!

[lightman]

Its 22º here this morning so I'll probably build a fire for Mama and the Cat and retire to the loading room to size and lube the 45-70 bullets that I cast Wednesday. I started depriming 2 20mm ammo cans of 9mm yesterday and may start tumbling those after while.