Page 1 of 6 123 ... LastLast
Results 1 to 20 of 102

Thread: My Trades -- SafetyJoe

  1. #1
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)

    My Trades -- SafetyJoe

    -- AS OF April 4, 2024 --
    I have what is listed below:

    --WET TUMBLED CLEAN--
    (20,000+) 223/556

    --WET TUMBLED CLEAN--
    (1200) Mixed HS 223/556 Good for 300 blk conversion
    (600) Federal HS 223 Rem
    (600) PMC HS 223 Rem
    (600) PSD HS 223 Rem
    (600) Winchester HS 223 Rem

    --WET TUMBLED CLEAN--
    (700) 45 ACP LPP Winchester HS

    --WET TUMBLED CLEAN--
    (7,200) 40 S&W Nickel Plated

    --NEW UNFIRED BRASS--
    (500) 32 S&W Long Lapua HS

    --WET TUMBLED CLEAN--
    (80) 45 Win Mag
    (24) 30 Remington (converted from 30-30 Win)
    (20) 270 Winchester
    (19) 45 GAP
    (9) 7mm Mauser (ackley improved)
    (7) 454 Casull
    (6) 460 Rowland
    (3) 50 GI
    (3) 30 Super Carry
    (2) 44 Auto Mag
    (2) 308 Marlin Express
    (1) 32 ACP

    imagegfjgjdgh.jpg
    I also have range scrap lead ingots available.
    Corn cob shaped and lyman ingots
    Lead was fluxed and is very clean
    BNH varies, but is plenty hard for handgun bullet casting

    I'm wanting to trade these reloadable brass cases. I'm looking for 44 Magnum & boxer primed 7.62x39 brass that are in good condition. Good condition means the brass is not cracked, heavily dented, corroded or tarnished and can be reloaded several times. with that being said, once fired brass is still preferred, but not required.

    Unless listed otherwise all my brass has been wet tumbled clean with stainless steel pins. Uncleaned brass will be listed separately.

    Some calibers have been sorted by head stamp and those will be listed separately.

    Trades should be large enough to use a padded flat rate USPS envelope, but larger trades using a medium or large flat rate USPS box are preferred even more. Some consideration might be made for calibers I don't have much quantity of.

    HS is an abbreviation for " Head Stamp "
    Last edited by SafetyJoe; 04-04-2024 at 09:47 AM.

  2. #2
    Junior Member
    Join Date
    Jul 2015
    Posts
    6
    Feedback Score
    0
    Impressive.

  3. #3
    Junior Member
    Join Date
    Jul 2015
    Posts
    6
    Feedback Score
    0
    And you where mad I didn't send you free brass lol.

  4. #4
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Nope, I just expected at least a reply to my PM. I saw that you were logged in several times during the day, but you never even gave me the courtesy to reply. That's all I expected and not too much to ask.

    Quote Originally Posted by Bake40 View Post
    And you where mad I didn't send you free brass lol.

  5. #5
    Junior Member
    Join Date
    Apr 2017
    Posts
    10
    Feedback Score
    2 (100%)
    Are you trading or selling your brass? I can use 300- 30 carbine, 94-50ae, 300-30-30 WINCHESTER, 400-45acp lpp federal hs. I am looking for a medium flat rate priority box.
    I do not have any 7.62x39 to trade you though.
    If interested let me know.
    Last edited by HARDSHOOTER; 01-09-2018 at 02:58 PM.

  6. #6
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Sorry, I'm only looking for trades. What other calibers do you have for trade? Maybe we can work something out since you don't have any 7.62x39 right now. Thanks

    Quote Originally Posted by HARDSHOOTER View Post
    Are you trading or selling your brass? I can use 300- 30 carbine, 94-50ae, 300-30-30 WINCHESTER, 400-45acp lpp federal hs. I am looking for a medium flat rate priority box.
    I do not have any 7.62x39 to trade you though.
    If interested let me know.

  7. #7
    Brass Trader Pacomdiver's Avatar
    Join Date
    Feb 2013
    Posts
    106
    Feedback Score
    10 (100%)
    private message sent (had to spell it out to get more than 10 characters required)

  8. #8
    Junior Member
    Join Date
    Apr 2017
    Posts
    10
    Feedback Score
    2 (100%)

    Brass trade from safety joe

    I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

    I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

    All brass has been polished but not deprimed.

  9. #9
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Thanks for the offer, but I can't really use any of that stuff aside from adding it to my list to re-trade with other people here. I looked to see if you had posted your own thread, but didn't see it. It can't hurt to create one yourself because that will make it a lot easier for others to see what you have and what you want.

    Quote Originally Posted by HARDSHOOTER View Post
    I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

    I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

    All brass has been polished but not deprimed.

  10. #10
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Actually, on second thought. I might be able to help you with some federal HS lpp 45 acp and 30-30 win, but the 30 carbine and 50 ae I want to hold onto so I can try to use those to get some 7.62x39. I'm sorting out some FC HS 45 acp right now. When I'm done I'll send you a PM about making a trade for your 357 sig and 38 special brass. What's the condition of your 357 sig and 38 special brass? Is it once fired?

    Quote Originally Posted by HARDSHOOTER View Post
    I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

    I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

    All brass has been polished but not deprimed.
    Last edited by SafetyJoe; 01-12-2018 at 02:24 PM.

  11. #11
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    I updated my totals and list of calibers that I'm looking for which now includes 10mm AUTO.

  12. #12
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    I sent a PM to you with a trade offer using my Federal 45 acp LPP and 30-30 Winchester brass.

    Quote Originally Posted by HARDSHOOTER View Post
    I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

    I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

    All brass has been polished but not deprimed.

  13. #13
    Junior Member
    Join Date
    Apr 2017
    Posts
    10
    Feedback Score
    2 (100%)
    Hello joe::: Here is your tracking number::::::: 9505 5101 4232 8016 0505 60::::::. You should have your package on 1/18/2018. Thanks again. Doug

  14. #14
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Thanks everyone. I traded away 50 lbs of my nickel plated stuff and updated my list. Next week I'll update it again with the brass I got in this recent huge trade after I deprime and clean the brass. I'm getting some new calibers, but also adding to some I already have listed.

  15. #15
    Junior Member
    Join Date
    Apr 2017
    Posts
    10
    Feedback Score
    2 (100%)
    Hello joe.
    I would like to trade for your 45acp federal hs. Looking for 1,000 pieces. What would you like to trade for that?
    Doug

  16. #16
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Yeah, sure we can do another trade for 45 acp federal HS brass again, but not right now. Wait a little while so you get a chance to find something else other than 38 special to trade. Thanks

    Quote Originally Posted by HARDSHOOTER View Post
    Hello joe.
    I would like to trade for your 45acp federal hs. Looking for 1,000 pieces. What would you like to trade for that?
    Doug

  17. #17
    Junior Member
    Join Date
    Apr 2017
    Posts
    10
    Feedback Score
    2 (100%)
    Hello SafetyJoe. I have 223 mixed hs and 7.62x39 mixed hs for trade. All cleaned but not deprimed although some are.

    Looking for 44mag, 357 mag, 50ae, 30 M1 Carbine, 30-30, 45 acp federal lpp.

    Sound interesting? I hope your big trade went well.

    Doug
    Last edited by HARDSHOOTER; 02-07-2018 at 11:33 AM.

  18. #18
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Yeah, my big trade went really well. I just finished de-priming everything and wet tumbling everything. The 270, 30-06 and 243 that I'm going to size have been lubed and I'm getting ready to size them. After that's done and the lube is tumbled off I'll separate them by head stamp and add those to my list along with the many other calibers I got in the trade, but aren't going to size just because I don't have the die for those calibers.

    As far as making another trade with you that's fine, but I already have a 55 gal drum full of 223 that I haven't gone through yet so I'm not really interested in taking on anymore of that caliber right now, but the 7.62x39 you have I might be interested in as long as they are not berdan primed. In this last big trade I did get 121 more pieces of 50 AE, but I haven't updated my list to reflect those new ones yet, but the total count should be 215 now. I'll probably finish going through everything and update my list this weekend or early next week. I'm also going to update my list of calibers I'm looking for to include a few that a friend wants which are 6.5 grendel, 45 GAP and 25 acp.

    Quote Originally Posted by HARDSHOOTER View Post
    Hello SafetyJoe. I have 223 mixed hs and 7.62x39 mixed hs for trade. All cleaned but not deprimed although some are.

    Looking for 44mag, 357 mag, 50ae, 30 M1 Carbine, 30-30, 45 acp federal lpp.

    Sound interesting? I hope your big trade went well.

    Doug

  19. #19
    Junior Member
    Join Date
    Apr 2017
    Posts
    10
    Feedback Score
    2 (100%)

    Brass trade

    Hello joe. My 7.62x39 is boxer brass and not the crappy berdan primed steel cases. When we do another trade

    i would like to do the trade pound per pound if that works for you. I have all my brass in seal a meal bags. I

    thought it might make it easier instead of counting each piece of brass. Medium size priority flat rate box is

    what i am thinking of sending. Ok by you?

  20. #20
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    I'm not too sure if I like the idea of trading pound for pound because some calibers have a much higher value than others. If we were only trading stuff like 9mm and 40 S&W then it might be a good idea. I'm a little too OCD about some things and counting brass is one of them.

    EDIT: However, none of that is to say weighing brass to determine the approximate count is a bad idea. I did that to the 45 acp and 380 acp brass I have that's listed. I just don't think trading based 1 lb of brass for 1 lb of brass will always be fair.

    Quote Originally Posted by HARDSHOOTER View Post
    Hello joe. My 7.62x39 is boxer brass and not the crappy berdan primed steel cases. When we do another trade i would like to do the trade pound per pound if that works for you. I have all my brass in seal a meal bags. I thought it might make it easier instead of counting each piece of brass. Medium size priority flat rate box is what i am thinking of sending. Ok by you?
    Last edited by SafetyJoe; 02-08-2018 at 02:50 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check