My Trades -- SafetyJoe

[SafetyJoe]

-- AS OF November 15, 2023 --
I have what is listed below:

--CLEANED & SOON TO BE SORTED--
(50,000+) 223/556

--WET TUMBLED CLEAN--
(1400) Mixed HS 223/556 Bad for 300 blk conversion
(1400) Mixed HS 223/556 Good for 300 blk conversion
(700) Federal HS 223 Rem
(700) PMC HS 223 Rem
(700) PSD HS 223 Rem
(700) Winchester HS 223 Rem

--WET TUMBLED CLEAN--
(198) 308 WIN Aquila HS
(125) 308 WIN PPU HS
(107) 308 WIN/7.62x51 Misc. HS
(76) 7.62x51 IMI HS
(54) 7.62X51 PPU HS

--WET TUMBLED CLEAN + SIZED & TRIMMED--
(273) 6.5 Creedmoor LRP Federal HS
(169) 6.5 Creedmoor LRP Winchester HS
(44) 6.5 Creedmoor SRP Federal HS
(21) 6.5 Creedmoor LRP Remington HS
(20) 6.5 Creedmoor LRP Lapua HS
(20) 6.5 Creedmoor LRP Sig HS
(15) 6.5 Creedmoor SRP Federal HS Nickel Plated
(9) 6.5 Creedmoor LRP Norma HS

--WET TUMBLED CLEAN--
(9,100) 45 ACP SPP Mixed HS
(3,500) 45 ACP LPP Winchester HS
(1,400) 45 ACP LPP Mixed HS
(700) 45 ACP LPP Remington HS

--WET TUMBLED CLEAN--
(15,300) 40 S&W
(8,100) 40 S&W Nickel Plated
(916) 10mm AUTO Small Primer

--NEW UNFIRED BRASS--
(500) 32 S&W Long Lapua HS
(250) 303 British Hornady HS
(150) 250 Savage W-W Super HS

--WET TUMBLED CLEAN--
(118) 30 Carbine
(80) 45 Win Mag
(31) 32 S&W Long
(24) 30 Remington (converted from 30-30 Win)
(20) 270 Winchester
(19) 45 GAP
(18) 300 Savage
(9) 7mm Mauser (ackley improved)
(7) 454 Casull
(6) 32 H&R Mag
(6) 460 Rowland
(4) 450 Bushmaster
(3) 50 GI
(3) 30 Super Carry
(2) 44 Auto Mag
(2) 308 Marlin Express
(2) 243 Winchester
(1) 35 Remington
(1) 7mm Rem Mag
(1) 32 ACP

imagegfjgjdgh.jpg
I also have range scrap lead ingots available.
Corn cob shaped and lyman ingots
Lead was fluxed and is very clean
BNH varies, but is plenty hard for handgun bullet casting

I'm wanting to trade these reloadable brass cases. I'm looking for 44 Magnum & boxer primed 7.62x39 brass that are in good condition. Good condition means the brass is not cracked, heavily dented, corroded or tarnished and can be reloaded several times. with that being said, once fired brass is still preferred, but not required.

Unless listed otherwise all my brass has been wet tumbled clean with stainless steel pins. Uncleaned brass will be listed separately.

Some calibers have been sorted by head stamp and those will be listed separately.

Trades should be large enough to use a padded flat rate USPS envelope, but larger trades using a medium or large flat rate USPS box are preferred even more. Some consideration might be made for calibers I don't have much quantity of.

HS is an abbreviation for " Head Stamp "

[Bake40]

Impressive.

[Bake40]

And you where mad I didn't send you free brass lol.

[SafetyJoe]

Nope, I just expected at least a reply to my PM. I saw that you were logged in several times during the day, but you never even gave me the courtesy to reply. That's all I expected and not too much to ask.

And you where mad I didn't send you free brass lol.

[HARDSHOOTER]

Are you trading or selling your brass? I can use 300- 30 carbine, 94-50ae, 300-30-30 WINCHESTER, 400-45acp lpp federal hs. I am looking for a medium flat rate priority box.
I do not have any 7.62x39 to trade you though.
If interested let me know.

[SafetyJoe]

Sorry, I'm only looking for trades. What other calibers do you have for trade? Maybe we can work something out since you don't have any 7.62x39 right now. Thanks

Are you trading or selling your brass? I can use 300- 30 carbine, 94-50ae, 300-30-30 WINCHESTER, 400-45acp lpp federal hs. I am looking for a medium flat rate priority box.
I do not have any 7.62x39 to trade you though.
If interested let me know.

[Pacomdiver]

private message sent (had to spell it out to get more than 10 characters required)

[HARDSHOOTER]

I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

All brass has been polished but not deprimed.

[SafetyJoe]

Thanks for the offer, but I can't really use any of that stuff aside from adding it to my list to re-trade with other people here. I looked to see if you had posted your own thread, but didn't see it. It can't hurt to create one yourself because that will make it a lot easier for others to see what you have and what you want.

I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

All brass has been polished but not deprimed.

[SafetyJoe]

Actually, on second thought. I might be able to help you with some federal HS lpp 45 acp and 30-30 win, but the 30 carbine and 50 ae I want to hold onto so I can try to use those to get some 7.62x39. I'm sorting out some FC HS 45 acp right now. When I'm done I'll send you a PM about making a trade for your 357 sig and 38 special brass. What's the condition of your 357 sig and 38 special brass? Is it once fired?

I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

All brass has been polished but not deprimed.

[SafetyJoe]

I updated my totals and list of calibers that I'm looking for which now includes 10mm AUTO.

[SafetyJoe]

I sent a PM to you with a trade offer using my Federal 45 acp LPP and 30-30 Winchester brass.

I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

All brass has been polished but not deprimed.

[HARDSHOOTER]

Hello joe::: Here is your tracking number::::::: 9505 5101 4232 8016 0505 60::::::. You should have your package on 1/18/2018. Thanks again. Doug

[SafetyJoe]

Thanks everyone. I traded away 50 lbs of my nickel plated stuff and updated my list. Next week I'll update it again with the brass I got in this recent huge trade after I deprime and clean the brass. I'm getting some new calibers, but also adding to some I already have listed.

[HARDSHOOTER]

Hello joe.
I would like to trade for your 45acp federal hs. Looking for 1,000 pieces. What would you like to trade for that?
Doug

[SafetyJoe]

Yeah, sure we can do another trade for 45 acp federal HS brass again, but not right now. Wait a little while so you get a chance to find something else other than 38 special to trade. Thanks

Hello joe.
I would like to trade for your 45acp federal hs. Looking for 1,000 pieces. What would you like to trade for that?
Doug

[HARDSHOOTER]

Hello SafetyJoe. I have 223 mixed hs and 7.62x39 mixed hs for trade. All cleaned but not deprimed although some are.

Looking for 44mag, 357 mag, 50ae, 30 M1 Carbine, 30-30, 45 acp federal lpp.

Sound interesting? I hope your big trade went well.

Doug

[SafetyJoe]

Yeah, my big trade went really well. I just finished de-priming everything and wet tumbling everything. The 270, 30-06 and 243 that I'm going to size have been lubed and I'm getting ready to size them. After that's done and the lube is tumbled off I'll separate them by head stamp and add those to my list along with the many other calibers I got in the trade, but aren't going to size just because I don't have the die for those calibers.

As far as making another trade with you that's fine, but I already have a 55 gal drum full of 223 that I haven't gone through yet so I'm not really interested in taking on anymore of that caliber right now, but the 7.62x39 you have I might be interested in as long as they are not berdan primed. In this last big trade I did get 121 more pieces of 50 AE, but I haven't updated my list to reflect those new ones yet, but the total count should be 215 now. I'll probably finish going through everything and update my list this weekend or early next week. I'm also going to update my list of calibers I'm looking for to include a few that a friend wants which are 6.5 grendel, 45 GAP and 25 acp.

Hello SafetyJoe. I have 223 mixed hs and 7.62x39 mixed hs for trade. All cleaned but not deprimed although some are.

Looking for 44mag, 357 mag, 50ae, 30 M1 Carbine, 30-30, 45 acp federal lpp.

Sound interesting? I hope your big trade went well.

Doug

[HARDSHOOTER]

Hello joe. My 7.62x39 is boxer brass and not the crappy berdan primed steel cases. When we do another trade

i would like to do the trade pound per pound if that works for you. I have all my brass in seal a meal bags. I

thought it might make it easier instead of counting each piece of brass. Medium size priority flat rate box is

what i am thinking of sending. Ok by you?

[SafetyJoe]

I'm not too sure if I like the idea of trading pound for pound because some calibers have a much higher value than others. If we were only trading stuff like 9mm and 40 S&W then it might be a good idea. I'm a little too OCD about some things and counting brass is one of them.

EDIT: However, none of that is to say weighing brass to determine the approximate count is a bad idea. I did that to the 45 acp and 380 acp brass I have that's listed. I just don't think trading based 1 lb of brass for 1 lb of brass will always be fair.

Hello joe. My 7.62x39 is boxer brass and not the crappy berdan primed steel cases. When we do another trade i would like to do the trade pound per pound if that works for you. I have all my brass in seal a meal bags. I thought it might make it easier instead of counting each piece of brass. Medium size priority flat rate box is what i am thinking of sending. Ok by you?