Results 1 to 14 of 14

Thread: How do you deal with crimped primer pockets?

  1. #1
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)

    How do you deal with crimped primer pockets?

    The cases I do are in relatively low volume, so I just use a lyman VLD chamfer tool to remove the ridge left from crimping... As I end up with more and more military brass I'm debating a tool made for swaging primer pockets... Any suggestions?

  2. #2
    Brass Trader
    Join Date
    May 2013
    Posts
    320
    Feedback Score
    6 (100%)
    Like you, I use a couple of Lyman primer pocket reamers, depending on primer size. If I had tons of military brass I would probably get a Dillon Super Swage 600. I've only heard good things about it.

    Ed

  3. #3
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    RCBS primer pocket swager, because I got them on sale and the Dillon costs too much. Carpal Tunnel kind of prevents me from reaming them out.

  4. #4
    Junior Member
    Join Date
    Apr 2013
    Posts
    11
    Feedback Score
    8 (100%)
    Quote Originally Posted by WarEagleEd View Post
    Like you, I use a couple of Lyman primer pocket reamers, depending on primer size. If I had tons of military brass I would probably get a Dillon Super Swage 600. I've only heard good things about it.

    Ed
    Get the SUPER SWAGE! Well worth the money! I have the RCBS for the press too, but that is a pain in the A$$ if you have 1000 to do!

  5. #5
    Senior Member
    Join Date
    Jul 2013
    Posts
    132
    Feedback Score
    8 (100%)
    Quote Originally Posted by ZmanWakeForest View Post
    Get the SUPER SWAGE! Well worth the money! I have the RCBS for the press too, but that is a pain in the A$$ if you have 1000 to do!
    The RCBS works good for me. Its quick and easy. The pocket will accept a primer with no problems, and they hold a primer as well as any non crimped pockets.

  6. #6
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    I don't even use an actual primer pocket reamer, the VLD chamfer tool seems to be the easiest and leaves a very good angle making the primer go in easily (haven't had any pop out or anything, either). The super swage looks a bit to speedy for me at this point... Maybe sometime in the future though

  7. #7
    Brass Trader don3's Avatar
    Join Date
    Sep 2013
    Posts
    27
    Feedback Score
    4 (100%)
    Have the dillon and the RCBS, use dillon for large amounts, other for a few, both work well for there intended use.

  8. #8
    Junior Member MRBACKHAND's Avatar
    Join Date
    Apr 2014
    Posts
    4
    Feedback Score
    0
    I also suffer from carpal tunnel and even having surgeries in both hands it was no fun cleaning the primer pockets so the best money invested was for the rcbs prep center . I bought it from midway USA and after discounts and rebates i payed 120$ shipped best 120 spent so far and the pain in my hands are no longer there ... Good luck

  9. #9
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    I ended up getting a super swage a couple months ago... Right about the time I bought 1000 once fired FC 223 (all crimped, of course) for a very good price... Once set up it did make easy work of the pockets, but I did over-swage 100 or so cases that are now suffering prematurely from loose primer pockets...

    I'd have to say that the super swage was well worth the $103 I payed for it from www.grafs.com

  10. #10
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    I've always wanted the Dillon swager, but they're so darned expensive!

  11. #11
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Quote Originally Posted by gandog56 View Post
    I've always wanted the Dillon swager, but they're so darned expensive!
    I'm surprised you don't already have one. With the volume of brass that you seem to have it would be worth the money.

    I broke one of my connecting links on a lee single stage press with the RCBS swage dies... Did about 120 cases total, couldn't get the desired amount of swage, then I look down at the press and saw a big crack through one of the links... Gave me an excuse to order a few spare parts that I wanted though.
    Last edited by Mbaker78; 05-01-2014 at 04:07 AM.

  12. #12
    Junior Member
    Join Date
    May 2014
    Posts
    2
    Feedback Score
    1 (100%)
    Quote Originally Posted by MRBACKHAND View Post
    I also suffer from carpal tunnel and even having surgeries in both hands it was no fun cleaning the primer pockets so the best money invested was for the rcbs prep center . I bought it from midway USA and after discounts and rebates i payed 120$ shipped best 120 spent so far and the pain in my hands are no longer there ... Good luck
    I also use the RCBS case prep center for removing the crimp on primer pockets good tool worth the money

  13. #13
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Right now lack of a bench to mount it. I mean I'm reloading using the Lee hand press right now.

  14. #14
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    I've debated getting one of those just to have it, I'm sure it would come in handy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check