PDA

View Full Version : My Trades



don3
10-09-2015, 01:06 PM
If interested in any pm me for condition/ ask if looking for something not listed, might have a few some where

22 NOSLER: 31brass
300 Win Mag: FC=4 brass and 7 nickel, Hornady=2 brass, Barnes=8 nickelRP=3 brass
300 black out: 20 PNWArms
204 Ruger: G.F.L=19
300 Weatherby mag, 1
7.62x39Winchester 50 +
50AE =4 Hornady
8MM Mauser=36PPU, 2FC
25-06 10 Hornady
22 Sav. 1 imperial
280 rem. 1 winchester/nickel
270 Win. 18 super speed,15 RP, 7 Rem-Umc,14 Hornady
220 swift 10 FC nickel, 1 Hornady brass
300 WSM 4 Winchester nickel , 7 FC brass, 19 Winchester brass
7MM Rem. Mag. 5 FC brass
450 bushmaster 25 hornady
270 Win. Short Mag. 6 Winchester
35 Whelen, 8 Hornady, 5 FC
6.5 creedmoor, 20 FC brass, 6 Hornady nickel
70MM PRC: 20 hORNADY
7*62x54: 16 PPU

have lots of other brass so just ask if looking for something.


I am looking for: 300 Savage, 32-40 win, 218 bee, 25-20 win. . etc. I will trade brass for any die sets or moulds you may have laying around, interested in black powder guns also'
I COULD USE SOME 222 REM. BRASS ALSO

cowboybart
12-11-2015, 06:49 PM
I am interested in 243, 50 AE, 284 and 300 WM

I have dies sets:

243 WSSM dies. RCBS. NEW.
264 Win Mag dies. Bonanza. NEW.
280 Rem dies. Pacific & CH.

Shooterontheline
04-24-2016, 04:34 AM
PM Sent to don3

Sharpshooter
05-01-2016, 02:59 PM
Don3, I'm looking for .25-20 Win and .25-20 SingleShot brass as well as 9.3X72R brass. I do have a few extra die sets you may be interested in. Also looking for an old Ideal or Winchester hand loader tool for the .25-20 S.S. I'm new to the site and am not sure just how to PM (I assume that means personal message)?
SharpShooter

don3
08-16-2018, 12:38 PM
added to list

cowboybart
08-17-2018, 07:59 AM
I have :
RCBS 257 Wby Mag 2 die set
RCBS 270 WSM die set. New.
Lee 7mm Rem Mag 3 die set w/ Collet neck sizer
Redding 7 RUM deluxe die set. FL, neck, seater.
Hornady 30-30 die set.
RCBS 30-06 die set. New.
Lee 8x57 Mauser die set. Shellholder and dipper.
Texan steel 44 mag die set with extra Lee carbide sizer die.

Interested in 357 Sig and 50 AE

don3
08-17-2018, 08:30 AM
I'm interested in 257 Wby & 30-06 dies. Let me know what is fair to you. Have a box of 20 speer 325 gr. 50 cal. hollow point bullets I can throw in.

Don

don3
11-28-2018, 07:31 PM
updated list

don3
01-01-2019, 08:06 AM
updated with some added, HAPPY NEW YEAR

Rmatchell
01-01-2019, 08:38 AM
Pm on the way

Shawlerbrook
01-01-2019, 04:43 PM
Pm sent to don

don3
02-25-2019, 05:17 PM
Back to top, been having trouble with PM's, hope all is OK now

don3
05-22-2019, 02:14 PM
Back to top with added brass

Oseola
05-24-2019, 07:52 PM
I'll trade you 14 WW .32-20 for your 13 WW .45-70.

don3
05-16-2020, 01:13 PM
updated list, back to top

vertix
10-18-2020, 08:21 PM
If interested in any pm me for condition


300 Win Mag: FC=4 brass and 7 nickel, Hornady=2 brass, Barnes=8 nickelRP=3 brass
300 black out: 19 mixed
204 Ruger: G.F.L=19
300 Weatherby mag, 1
308 win. I have 145 mixed head stamp,Hornady=20,FC=75,PMC=31,PPU=20 no history
9X18 Makarov=115 mixed head stamp
50AE =4 Hornady
8MM Mauser=3PPU, 2FC


I am looking for 32-40 win, 218 bee, 25-20 win. 32-20 win. etc. I will trade brass for any die sets or moulds you may have laying around.

you still looking for 30-20 I have a few 100's

don3
10-18-2020, 10:42 PM
VERTIX,

If you mean 32-20 yes I am. What do you need

vertix
10-19-2020, 10:14 AM
i could use 308but more than them need 45 colt really bad

vertix
10-19-2020, 02:34 PM
What is the status of your 32-20 brass, new, once fired, range brass, etc. I have 308 brass but I also have 100 new in box Starline 45 colt

once i'm home will have to check some is new and the rest is once fired.I want the 45 for sure.what headstamp is the 308?the 32-20 i have is all R-P. How much 308 youhave allso?

vertix
10-19-2020, 05:02 PM
once i'm home will have to check some is new and the rest is once fired.I want the 45 for sure.what headstamp is the 308?the 32-20 i have is all R-P. How much 308 youhave allso?

I would like to get the 308's and the 45 colts.100 of the 32-20 are new it looks like the rest are once fired let me know how many you would need to make this trade happen.have some dies for trade if you have any I need

don3
10-19-2020, 06:04 PM
I have the following dies for sale elsewhere, will trade for your dies if there is anything you need.

Lyman:
7 MM Rem Mag. 2 die set, FL sizer and seating die with RCBS #4 shell holder
30-06,308 win./307 win. neck expanding [M] die# 7349002 Like new
222Rem/222rem mag/223 rem/22-250 neck expanding [M] die #7342097 like new

Lee:

41 Mag. 3 die set with shell holder and powder dipper, no load data

Pacific:
222 Rem. 2 die FL set with RCBS #10 shell holder , no box {seating die may be Lyman, it works}
RCBS:
270 Win short Mag. 2 die set #31301, FL sizing die and seating die. Like new in box
222 Rem. Mag 2 die set #11001, FL sizer and seating die. Older set in green plastic box with rounded edges
280 Rem. FL 2 die set #14001 with shell holder

vertix
10-19-2020, 07:38 PM
let me know and how much i need to box up for ya

vertix
10-20-2020, 04:45 PM
you have time to check out j308's

thanks roy

don3
10-20-2020, 05:37 PM
Not yet, had flat tire on truck today, screwed everything up, will try tomorrow. How much are you looking for?

vertix
10-20-2020, 06:39 PM
not a problem. well the 100 45long colt and many 308's not sure how many you have. got a AR 10 so could use a lot of them

vertix
10-23-2020, 09:50 AM
VERTIX, Counted 308/762x51 360 total, most are comercial some military. A few are stained, most clean. I would like to trade 100 new 45 colt for 100 new 32-20. would like to trade 308 for dies, interested in 6.5 grendel [LEE]. 7-30 waters [RCBS] and 243 Win [RCBS] Let me know where we stand.
Don

that all sounds good but i got rid of 6.5 grendel dies yesterday afternoon to a guy at the gun shop other than that still have the other dies and would trade those for the 308/7.62-51and the the 32-20 for the 45 colt let me know if this is good for you I will PM you my address

don3
10-23-2020, 10:16 AM
Sounds fine. 7.62, 7-30 and 243 dies for 308 and even trade 32-20 for 45 colt. PM me your info and will get this in tomorrows mail

don3
12-06-2020, 04:05 PM
added more brass so back to top

don3
05-23-2021, 07:45 AM
added some, in need of 38-55 and 222

don3
06-21-2021, 08:39 AM
Added more brass

cowboybart
03-23-2022, 04:01 PM
I have some die sets and a T/C 50 cal Renegade. My phone hates this site. email is better DirtEDeeds AT protonmail DOT com

don3
09-03-2024, 11:33 AM
Added more brass. Have lots of other brass if looking for something.