Pacomdiver- brass to trade- edited trades

[Pacomdiver]

have some brass to trade, ill add more as i dig them out.



30-30 nickel 1x fired, -50

35 rem -4 hornady

500 s&w mag- 28

9mm luger -3k plus mixed

380 auto- 3K plus mixed

30-06 nickel - 4 FC

338 ultra mag - 11

7mm mag- 59

32 h&r- 11

308 black hills match -1x fired- 29

8x56rs - 12 pcs PPU

44 COLT(not 45 colt) 26 pcs starline

222 mag- 19pcs rem

222- 11pcs 10 rp, 1 ppu

223(5.56) mixed military/commercial brass- 3K+

30 carbine berdan primed- 169- could be used for jackets



COMMERCIAL BULLET JACKETS 153 .223 x.710 and 4 .243 x .877





trades wanted for above

50 beowulf brass and bullets, 308 diameter RNFB bullets 150 to 220g ,.308 diameter bullets 120g-220g for 300 blackout, 168-220g .308 BTHP match bullets (berger VLDs, matchkings, amax, hornadys, etc ), .308 fmj bullets 147-150g , 55-62g .223 fmj or VMAX bullets, 68-90g .223 match bullets, .311 125g fmj, .311 147g-182g fmj bullets, .366 spritzers 250 or 286g , preferably with boattail, 9mm 115g fmj (plated prefered), .451 230g fmj (plated prefered), 338 lapua brass and bullets (250g or 300g smk or scenars preffered), x54 boxer brass, 8mm mauser brass and .323 bullets, 303 british cases and bullets, x39 boxer brass, 308 Lake City cases, .277 130g nosler ballistic tips, .429 44mag 240g hp bullets , 30 carbine bullets

Boolet molds
12g slug mold, 20g slug mold, 8mm mauser (.323,.324,.325) mold, 4 or 6 cavity preferred, 308, 310, 311, 312, 314 or 316 diameter cast boolet molds 125-200g, lyman # 311041, 311291, 311299, 314299, 45 and 45LC cast boolet molds, prefer 4 or 6 cavity ,44 mag 240g double or six cavity molds,

lyman bullet sizing dies for 450/4500: 224,225,312,313,324,325,451,452 and top punches 284,413

swaging dies for 308 hp or fmj swager and 40 to 45acp swager,

ar15 parts and mags, ar10 parts and mags, rem 700 parts, m1 carbine 30 rnd mags

[scottarthur]

PM sent on old site.

Scott

[rbuck351]

I have 308LC and x39 boxer. I'm interested in the 444brass if you don't make the trade.

[gandog56]

What do you mean by swager? Bullet or crimped primer hole swager.

[Bake24]

How many 22 hornets do you have

[Pacomdiver]

added 9mm win mag brass

[Bake24]

I have 50 30 carbine brass primed would like to make a deal let me no if your interested

[Bake24]

Plus 10 44 mag brass

[Pacomdiver]

bake,
what are you interested in?

[Bake24]

7 wsm , 32-20 ,32 win 256 win 22 hornet 7mm express 450

[chuck 58]

I am interested in your swaging die for 223 308 and 45. and any 223 308 and 45 bullets you have. What are you looking to trade for?

[M Hicks]

I think he wants the swaging dies Chuck. Not positive but pretty sure he wants to trade what is at the top of his OP for stuff at the bottom.

[chuck 58]

Yea looks that way. I just got excited.

[Pacomdiver]

yeah alot of people dont spend the time to read it right

[Pacomdiver]

totals adjusted and some new brass added

[Pacomdiver]

added 223 primed cases and adjusted totals

[Pacomdiver]

totals adjusted

[Mathew]

PM Sent 4/14

[Pacomdiver]

updated totals

[Pacomdiver]

totals edited

[Pacomdiver]

adjusted totals and trades

[20guage1]

Tony, no sales of brass are allowed here.

[Pacomdiver]

totals updated

[gandog56]

I have Nosler 230 grain .45 JHP's.

Would want the 357 SIG, .44 specials, and maybe 100 of them .45's. How many projectiles you want for that?

[Pacomdiver]

honestly i dont shoot that much hollow point, mainly fmj

[gandog56]

honestly i dont shoot that much hollow point, mainly fmj

Ummm, why? You just punching paper? (Pretty much what I do, but I got a deal on these HP's.)

[ricky]

totals edited

Still have the 450 marlin? I have 308 bullets and 223 bullets

[Pacomdiver]

gandog, yes paper and steel plates.

ricky, yes i still have them , interested in anything else?

[ricky]

pacomdriver pm send

[gandog56]

How about 9mm 115 grain Precision Bullets with the moly coating?

76

[Pacomdiver]

gandog,
are those 9mm jacketed or lead?

[fatboy]

pacomdiver, I am interested in your 35 rem and your 45 long colt, I have some 44 mag and .311 bullets I will pm you with details.

[gandog56]

They are a lead bullet coated with a proprietary coating, probably mostly moly, which give them a black finish look. I use them because they are cheap, they do not lead the barrel, and his prices include the shipping. Check out his web page and see what happened when he put a blow totch to the bullet.

http://www.precisionbullets.com/

[Pacomdiver]

gandog pm sent

[Mbaker78]

PM sent....

[Pacomdiver]

adjusted totals

[MRBACKHAND]

Pm sent for 40 brass

[Pacomdiver]

edited totals

[Pacomdiver]

totals edited and brass added

[Pacomdiver]

added more brass

[rbuck351]

I am interested in: 32S&Wlong (50), 22H (3), 30mau (5), 25/20 (5) and 35Rem (14). I have x39 boxer,44mag and I think 308LC. How much of what would it take for those listed?

[Mbaker78]

I'd still like the 50 beowulf, but just to add to my collection...

[Shooterontheline]

How many 357 bullets would it take to trade for the 32win sp cases?

[Pacomdiver]

rbuck, replied to your pm

mbaker, i'll check if I still have them, I don't remember seeing them last time I was digging thru the brass box

shooter, you interested in any others to make shipping worthwhile?

[Shooterontheline]

Sent PM…..

[Pacomdiver]

adjusted totals

[oldsagerat]

About the -

6mm rem= brand new sealed bag of 50 winchester brass- grabbed wrong bag

PM sent.

[Pacomdiver]

edited traded brass

[Pacomdiver]

totals updated

[Pacomdiver]

bump, new brass added

[Pacomdiver]

bump to the top

[Pacomdiver]

added more brass

[Shooterontheline]

Pacomdiver,
We didn't hookup a while back so here we go again. I'm interested in your 45acp SMALL primer case and the 30 carbine cases. I have a bunch of 357 plated bullets in 124gr weight.

Let me know a trade ratio.... Marko

[Pacomdiver]

added more brass and adjusted trades

[Pacomdiver]

edited brass totals

[Pacomdiver]

updated totals

[El Matavenados]

I have (17) 7.62.54r S&B stamped brass, and (5) 30 carbine (2 are pretty dirty/corroded). Also, (50) 100gr round nose 30 cal bullets. They look kind of like a cast boolet with a large cup (not like a jacket, though). They were factory made, I believe for the 30 carbine.

Finally, I have a Lyman 2660410, which is a 311410 130-gr boolet for the 30 carbine, with original box. It was used only once, but I left it on the table in the garage, and it has a lot of light surface rust on the outside. One of the cavities has a small spot of surface rust.

Would you take all of the above in trade for the (26) 300 WM cases and (700) 223 cases? Or make me a counter-offer?

[Shooterontheline]

Pacomdiver,
I have a bunch of 30 Carbine in brass and nickel available (all once fired). I am looking for 6.5x55 mauser and 45acp small primer cases. What kind of trade can we do?

[Pacomdiver]

el matavenados, pm sent

shooter, i have enough 30 carbine cases already, only cals i could use more of are 762x54 and 8mm mauser cases




added a couple cals and adjusted totals

[Pacomdiver]

updated totals

[Pacomdiver]

bump, edited totals and added 300 b/o trades

[LEP]

Interested in the 308 R-P cases, Swede and Swiss boxer brass, and 300 Win Mag Brass.
Believe I have 147 gr 311 bullets, 110 gr 30 carbine bullets, and maybe some LC 308 brass I could trade.

[cowboybart]

Interested in the 6.5x55, some 45 ACP and maybe 308.

I have Nosler 130 gr bullets, a few 303 Brit cases and some 5.7x28 that I traded into for swaging into 30 cal bullets. I'm not gonna go the swaging route.

[Pacomdiver]

added 9mm mak brass

[Pacomdiver]

more brass added including 10mm and 7mm mag

[n10sivern]

30-06 PPU- 141pcs 1x fired
6.5 x55 Swedish mauser- 20 pcs PMC
45acp large prime- 1k+

I'm interested in the above

[45 Anything]

PM on the way

[45 Anything]

I keep getting error messages when I try to send a PM. Anyway, I happen to have a Corbin 4 cavity adjustable mold I'm no longer using. I used the hell out of it but it still works just fine. I also have a few thousand empty Federal 22LR brass, I sorted them by brand and wet tumbled them so they're all clean and i'd say 99%+ are Federal (i'm sure there are a few odd stragglers in there).Let me know what you think, I can sure send some pictures of the mold too.

[cowboybart]

I have a box of Hornady .311" 123gr Soft Point bullets and 17 pcs of 303 Brit brass

Interested in 308, 300 WM and 6.5x55

[cowboybart]

I have a box of Hornady .311" 123gr Soft Point bullets and 17 pcs of 303 Brit brass

Interested in 308, 300 WM and 6.5x55


I'm guessing the PM system is not working as it double tapped in the thread instead of sending it as a PM.

[Pacomdiver]

totals adjusted and new brass added

[LEP]

Interested in 300 Win Mag & 6.5x55. Have to see if I have anything you can use, first.

[gandog56]

I sent you a PM.

[Pacomdiver]

totals adjusted

[cowboybart]

Still interested in the 6.5x55 and the 357 Sig brass.

I have .311 123gr SP bullets and 9mm 115gr FMJ (not plated) bullets

[Pacomdiver]

5 Year anniversary of this post Bump, am cleaning up under my bench, so will be adding more brass as i find it

[cowboybart]

Happy anniversary. Do you ever respond to posts in this thread?? I posted just above (and below) with no response.

[Pacomdiver]

never got any pms from you making an offer, a brass trade should at least be worth more than shipping cost so there is some benefit to a trade

[Pacomdiver]

totals adjusted

[Pacomdiver]

totals adjusted

[Pacomdiver]

added brass and adjusted totals

[Pacomdiver]

totals adjusted

[RenoDave]

Interested in the 8x56rs - 12 pcs PPU let me dig and see what I have on your want list.

[RenoDave]

Interested in the 8x56rs - 12 pcs PPU let me dig and see what I have on your want list.

message sent

[Pacomdiver]

back to the top

[seeker]

I sent you a pm

[Mbaker78]

Sending PM....

[renofish]

what do you have in jackets to trade ‽