Page 1 of 3 123 LastLast
Results 1 to 20 of 51

Thread: "Brown brass"

  1. #1
    Junior Member
    Join Date
    Feb 2013
    Posts
    11
    Feedback Score
    0

    "Brown brass"

    Anyone have a way to get old brown colored brass, brite and shiney again? I have a handfull of assorted calibers of range brass that just won't shine up at all with cob, walnut, nufinish, or Lemishine. Some of it I keep throwing back into the tumbler, probably has spent a week being tumbled and still nadda, just brown. I have reloaded brown brass before for my own use, never had any issues but this stuff is brass I want to trade for calibers I need. Any ideas?

  2. #2
    Brass Trader ricky's Avatar
    Join Date
    Aug 2013
    Posts
    13
    Feedback Score
    6 (100%)
    Need to try a wet tumbler with stainless steal media.

  3. #3
    Administrator DukeInFlorida's Avatar
    Join Date
    Feb 2013
    Posts
    248
    Feedback Score
    5 (100%)
    Or, even without the fancy wet tumbler, you could try soaking your brown brass in a hot solution of: Lemishine (about a capful in a gallon of water. Add more if you need it.) and liquid dish washing solution (the type that you would use to wash dishes by hand).

    Swish the brass around in the hot solution. You should just about watch the brown melt off of the brass. Try that in a simple dish pan, and let us know how it goes.

    Administrator - Ammo Brass Trader
    NRA Life Member
    NRA Certified Metallic Cartridge Reloading Instructor

    Author of a book on reloading
    ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
    NRA RANGE SAFETY OFFICER


  4. #4
    Junior Member
    Join Date
    Feb 2013
    Posts
    11
    Feedback Score
    0
    That is the way I clean brass Duke, use almost boiling water, Dawn, and a bit more Lemishine than that and still nadda. I experimented leaving a couple of pieces in the solution overnite and in the morning it was still brown but had a patina of what I can only describe as rust on the cases. I tumbled them and that came right off leaving just a beautiful brown case. S/S wet tumbling is not in the cards. My little RCBS vibratory is still going strong and although I have buttloads of brass, once I get it tumbled and traded, I won't need the tumbler much so investing in a new one is out of the question. I suppose I will just scrap the most common calibers that I don't reload myself and keep the harder to find calibers and just put it in the description. Thanks for the input!

  5. #5
    Member jsmitfl's Avatar
    Join Date
    Feb 2013
    Posts
    3
    Feedback Score
    1 (100%)
    Taylor, try toilet bowl cleaner on a couple pieces. We use to use it on old fire ext. and it would bust the hard stuff off.

  6. #6
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    This is what my Thumler wet rotry tumbler does. What calibers you got? I'll consider trades.

    Before:
    SANY0096_zpsb01142de.jpg

    After:
    SANY0097_zps853f0655.jpg


    Or an alternative, you could send the brass to me, and I could do them for you.You would of course also have to pay me return postage.

  7. #7
    Administrator DukeInFlorida's Avatar
    Join Date
    Feb 2013
    Posts
    248
    Feedback Score
    5 (100%)
    DO NOT use anything with an alkaline in it. That would eat into the brass, making it weak and dangerous to shoot. An old fire extinguisher is fine, when you are only looking for pretty. But for shooting brass where strength is the key factor, please don't try toilet bowl cleaner.

    Quote Originally Posted by jsmitfl View Post
    Taylor, try toilet bowl cleaner on a couple pieces. We use to use it on old fire ext. and it would bust the hard stuff off.

    Administrator - Ammo Brass Trader
    NRA Life Member
    NRA Certified Metallic Cartridge Reloading Instructor

    Author of a book on reloading
    ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
    NRA RANGE SAFETY OFFICER


  8. #8
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    I know people that put Brasso in their tumbling media.....a BAD thing to do. Brasso also weakens the brass because it has ammonia in it, and ammonia attacks the molecular structure of the brass.

  9. #9
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)
    I use extra fine scotch brite to break through the patena, then tumble to finish. Never had a problem using this method. Cases end up nice and clean.

    After reading the post below, I would add to use the gray extra fine Scotch Brite (buffing pad), not the maroon ones. It's much finer and works just as good but with less scratching.
    JMHO
    Last edited by DaveL; 10-19-2013 at 07:31 AM.

  10. #10
    Junior Member
    Join Date
    Jul 2013
    Posts
    5
    Feedback Score
    0
    Get a maroon 3M buffing pad. The kind they use in auto-body shops . Chuck up a bore brush in a drill motor or drill press then slip a case over the slightly larger bore brush and hold a 3"X3" section of pad to the case as it spins. Wear gloves. This will break the oxidation on the surface exposing the softer brass under the hardened surface. Don't worry about the micro scratches they will now polish out next loading.

  11. #11
    Senior Member
    Join Date
    Jul 2013
    Posts
    132
    Feedback Score
    8 (100%)
    I finally get set up with the ss media. That is hands down the best cleaning I have been able to do. Should have done that sooner.

  12. #12
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Quote Originally Posted by jebsca View Post
    I finally get set up with the ss media. That is hands down the best cleaning I have been able to do. Should have done that sooner.
    I'm certainly a believer. Plus I got the Thumler's wet rotary tumbler at a STEAL price!

  13. #13
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    Quote Originally Posted by gandog56 View Post
    I'm certainly a believer. Plus I got the Thumler's wet rotary tumbler at a STEAL price!
    Man, gandog56, you are a deal magnet!

    I'm thinking about picking up a Harbor Freight rotary tumbler and trying the stainless steel/wet media tumbling. All the results I have seen are amazing compared to my dry tumbler. Mine clean up well enough to reload and shoot, but if I can get them as shiney as others have with ss media, then it will make them easier to pick up at the range. Besides, I often put dull cases in a citric acid bath. After they are dry I dry tumble them; it can get sort of tedious. The ss way would eliminate the need for the citric acid bath altogether and reduce time spent cleaning cases.

    Ed

  14. #14
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Quote Originally Posted by WarEagleEd View Post
    Man, gandog56, you are a deal magnet!

    I'm thinking about picking up a Harbor Freight rotary tumbler and trying the stainless steel/wet media tumbling. All the results I have seen are amazing compared to my dry tumbler. Mine clean up well enough to reload and shoot, but if I can get them as shiney as others have with ss media, then it will make them easier to pick up at the range. Besides, I often put dull cases in a citric acid bath. After they are dry I dry tumble them; it can get sort of tedious. The ss way would eliminate the need for the citric acid bath altogether and reduce time spent cleaning cases.

    Ed
    Jeeze, I just got some Harbor Freight coupons in an email for like 10-20% off depending on what you spend. PM me your email address I'll forward it to you.

  15. #15
    Senior Member
    Join Date
    Jul 2013
    Posts
    132
    Feedback Score
    8 (100%)
    I got the harbor freight two drum setup, and it is working good for me. I did a batch tonight of 223. I ended up having 124 cases in it and they look real good after an hour. I think I could have put more in, but that was what was in the pile that still needed cleaned.

  16. #16
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    Thanks, gandog56. I've actually got a 25% coupon, so I might be a deal magnet this time.

    jebsca, I'm going to try to get one after work today, order ss media this weekend, and hopefully be in business in a week or two.

    Ed

  17. #17
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    The media was almost a third of my start up costs.

    But dang, that brass sure do look pretty after I use it.

  18. #18
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    Picked up the Harbor Freight tumbler today!

    Ed

  19. #19
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Quote Originally Posted by WarEagleEd View Post
    Picked up the Harbor Freight tumbler today!

    Ed
    Make sure you put some Lemi-shine in the water! I have seen it sold at Wal-Mart.

  20. #20
    Senior Member
    Join Date
    Jul 2013
    Posts
    132
    Feedback Score
    8 (100%)
    Quote Originally Posted by WarEagleEd View Post
    Picked up the Harbor Freight tumbler today!

    Ed
    Based on what I have read, I try to put a pound each of ss media, brass, and water in each drum. I add a bit of dish soap and lemi-shine. I have played with the run time, and two hours looks about as good as it gets, even with some very dirty range brass. Then I set it out to dry over night. This is afer a quick run in the walnut and then decap and resize. The run in the walnut is more to protect my dies than anything else. BTW, I go my media at midway, but at only using two pounds, I think I would have been better off to use the link that gandog had for a two pound pack.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check