Page 27 of 46 FirstFirst ... 17252627282937 ... LastLast
Results 521 to 540 of 910

Thread: So, What You Doing On The Bench Today?

  1. #521
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)
    I just got 50 300 blackouts loaded with those new 220gr Hornady ELDs. 10.9grs of AA1680 with a COL of 2.260". They fit the mag and the chamber with no problems. If they shoot good (no reason they shouldn't) they're going to be my go to sub bullets. I didn't think there was any VLD bullets in 220grs that would fit in the mag but these do. Wu Hu!

  2. #522
    Brass Trader
    Join Date
    Dec 2016
    Posts
    337
    Feedback Score
    8 (100%)
    Sorted and identified a bunch of ammo that I got in a trade that I will be adding to my collection. Part of the fun of collecting, to me, is researching the ammo that I can't id.

  3. #523
    Moderator
    Join Date
    Feb 2013
    Posts
    354
    Feedback Score
    44 (100%)
    Loaded 150 rounds of 6.5 Grendel.

  4. #524
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Just straightening my reloading shed a bit. Spilled a box of loose .22 LR all over.

  5. #525
    Brass Trader Point-Man's Avatar
    Join Date
    Mar 2014
    Posts
    50
    Feedback Score
    16 (100%)
    My range has been closed since Aug. of last year for expansion . Before they completed and reopened there was a huge pipeline gas leak. About a month later there was a pipeline explosion with life lost. The range is still closed and work on it has stopped for the time being. Needless to say I haven`t shot or picked up brass since Aug. I have been loading ammo while I wait. At least 200 rounds for every rifle caliber except the .41 swiss and 500 for the handguns. I`m in the process of joining a shooting club. Had to wait for an opening.

  6. #526
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    I removed the primers out of about 60 pieces of 30-06 brass.

  7. #527
    Moderator
    Join Date
    Feb 2013
    Posts
    354
    Feedback Score
    44 (100%)
    I sorted through a bunch of bullets I received yesterday. Can anyone use cast 25 caliber 114 grain gas checked hollow point bullets, 375 caliber gas checked and non gas checked bullets and 54 caliber maxi balls for black powder.

  8. #528
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    Knocked a few more primers out of some .30-06 & .280 Remington cases.

  9. #529
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Mounted my new Lee bench mount priming tool on the bench. Figured while I was out there, might as well roll some more .300 AAC Blackout.

  10. #530
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Went yesterday and unloaded some ammo. Also traded for a lee load all II in 12ga, so now I get to learn to load shotgun too.

  11. #531
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Way back when I was young and had my real knees instead of the metal things I have now, I shot skeet almost every other day. I cannot tell you how many boxes of 12 gauge I reloaded using a Lee Load All. Not the easiest press to use but it definitely did the job. The thing it messed up the most seemed to be the crimp.

    I think I STILL have a few boxes of that stuff in my shed. But I lost a few of the parts for the thing when I moved down here, and since I am no longer shooting skeet I just tossed the thing. I think I also still have a 25 pound box of bird shot in my shed, and a jug of most of another bag.

  12. #532
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    I don't think I can load game loads for cheap enough to save any money... I'm getting 100 rounds of 7.5 shot 2-3/4" federal for $22. I'll likely just load bigger stuff like 00 buck and whatnot once I figure out what I'm doing... but I do still need to get my shotgun working right :/

  13. #533
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Rolled out a few more .300 AAC. Finished up all the Armscor 110 grain JRN pills I had doing it.

  14. #534
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    What are you seating them at to get them to feed?

  15. #535
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    Knocked the primers out of some 5.56 range brass and wet-tumbled one load of .30-06 brass.

  16. #536
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    I wet-tumbled my last bit of .30-06 brass. I can now load up a batch of M1 Garand-friendly '06 ammo. I will have to admit that before I learned of commercial .30-06 bending op rods on Garands, I did shoot a few boxes of Remington and Korean PMC through it without any ill effects. I don't know if I just got lucky or if the International Harvester Garands generally don't exhibit this behavior (they were made in the early 1950s). I'm not going to take any chances, though, and will load to general M1 "specs." Also, I cleaned some .308 brass that I recovered from the range.

  17. #537
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    I think it takes a fair number of rounds to bend the op rods on the garand and M14/M1a. But I'm not positive about that

  18. #538
    Brass Trader Point-Man's Avatar
    Join Date
    Mar 2014
    Posts
    50
    Feedback Score
    16 (100%)
    Loaded 100 Hornady 168 gr BTHP for my M1A. I will finally become a new member to a new to me shooting club.

  19. #539
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Quote Originally Posted by Mbaker78 View Post
    What are you seating them at to get them to feed?
    The least possible. They seem to go through OK. Mayne they just like my AR, I don't know.

  20. #540
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Quote Originally Posted by Point-Man View Post
    Loaded 100 Hornady 168 gr BTHP for my M1A. I will finally become a new member to a new to me shooting club.
    I just renewed my range membership. But since I leave Friday for an Alaska cruise I haven't had any time on the bench.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check