Lol, I was roughly estimating. I like em cheap, that's why my presses are both Lee
Lol, I was roughly estimating. I like em cheap, that's why my presses are both Lee
Come to think of it....so are my.
With the 147/150 try 16.2 grains of Lil Gun for about 1900 fps.
I feel the need for speed!!!!!
Mat, what is your COL? I am loading at 2.200.
2.100" I believe, I seat to the cannelure, and I trim my brass on the short side of SAAMI spec. I'll have to check when I'm at the bench later.
I know most books call for longer, but I'm getting good enough accuracy and they look a lot more normal seated that short, pressure looks good and I'm pulling about 1765fps
Finally tried those 110gr RN I got from you. They fed like a vegan in a steakhouse... Which is to say they didn't. I could probably load them a bit longer and see if that fixes it, I don't have much use for the remaining 90, so why not I guess...
I still have 100 left. I keep trying to find somebody that loads like 30 carbine, maybe they would be good for that.
110 grain RN what, FMJ? .308 I assume.
I used the 110 short jacket and they worked out pretty well but I had them already and I don't think I will buy any more for the 300.
I had a box of the 110 SJ and they fed fine in blackout, but the lead was pretty mangled by the time it made it into the chamber, and they didn't pull so well once seated... left a nice copper cup in the case while the lead came right out.
Still haven't gotten around to expirementing with those 110RN bullets yet.
That is true about the copper cup if you have to try and pull them.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |