Page 5 of 46 FirstFirst ... 3456715 ... LastLast
Results 81 to 100 of 910

Thread: So, What You Doing On The Bench Today?

  1. #81
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    I sized and primed some PPU 7.5 Swiss brass (which, once again, I think I got in a trade on this site).

  2. #82
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Whatcha gonna load it with?

  3. #83
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    I'm going to load some 155gr. Sierra MatchKings into the cases, hopefully this weekend.

  4. #84
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Just had a friend of mine that is a local sheriff deputy drop off his brass from rifle qualification. Looked to be mostly all hornady 223, roughly 750 total, some steel mixed in... I'll update after I've had a chance to sort it.

  5. #85
    Brass Trader
    Join Date
    Feb 2013
    Posts
    20
    Feedback Score
    4 (100%)
    Today I made some 85gr half jacketed bullets for my 7.62x25 using 50BMG primer cups for the half jackets then loaded and fired about 20 to check function. So far so good.

  6. #86
    Brass Trader LEP's Avatar
    Join Date
    May 2014
    Posts
    116
    Feedback Score
    13 (100%)
    Got out the 24 gauge shot-shell cases and dies to fabricate some 450/577 and realized I don't have a 1-1/4" press. Rats.
    Load and shoot: 6.5mm (Dutch, Jap., Carcano, Swede), 7x57, 7.35 Carcano, 7.5mm (Mas, Swiss), 303 British, 7.65x53, 7.7 Jap, 7.62x51, 30-06, 8x50R & 8x52R Siamese, 30-40 Krag, 8x57, 7.62x39, 7.62x54R, 8x 56R, 30 Carbine, 450/577 Martini, 300 Win Mag, 45 LC.

  7. #87
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Finally final processed all the brass from my last range trip. Did up lots of 7.62X54R, 7.62X25, 10mm, 9mm, 9mm Mak, .380, .38 special, .357 magnum, and 30.06. All cleaned, polished, sized, etc.

  8. #88
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    Finished loading the small batch of 7.5 Swiss.

  9. #89
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    What did ya load them with? I also reload them.

  10. #90
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    I loaded 155gr. Sierra Match Kings over IMR 3031. These were light loads, between 35.4 and 35.6 grains.

  11. #91
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    I try to duplicate the GP11 loads. So I use 168 grain bullets. If I used IMR3031 I would use about 40 grains.

  12. #92
    Brass Trader LEP's Avatar
    Join Date
    May 2014
    Posts
    116
    Feedback Score
    13 (100%)
    I reload the GP11. Have had excellent results with the 168 gr. HPBTs. Friend of mine won a milsurp match with my GP11 hand loads (he was present during the reload process).
    Load and shoot: 6.5mm (Dutch, Jap., Carcano, Swede), 7x57, 7.35 Carcano, 7.5mm (Mas, Swiss), 303 British, 7.65x53, 7.7 Jap, 7.62x51, 30-06, 8x50R & 8x52R Siamese, 30-40 Krag, 8x57, 7.62x39, 7.62x54R, 8x 56R, 30 Carbine, 450/577 Martini, 300 Win Mag, 45 LC.

  13. #93
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    Which bullet do y'all use?

  14. #94
    Brass Trader LEP's Avatar
    Join Date
    May 2014
    Posts
    116
    Feedback Score
    13 (100%)
    I had best results with Hornady #2200, 168 gr HPBT. Bulk Prvi 168's also worked very well.
    Load and shoot: 6.5mm (Dutch, Jap., Carcano, Swede), 7x57, 7.35 Carcano, 7.5mm (Mas, Swiss), 303 British, 7.65x53, 7.7 Jap, 7.62x51, 30-06, 8x50R & 8x52R Siamese, 30-40 Krag, 8x57, 7.62x39, 7.62x54R, 8x 56R, 30 Carbine, 450/577 Martini, 300 Win Mag, 45 LC.

  15. #95
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)
    Loaded 40 rounds of 7.5x54 French MAB ammo. Used 30-06 cases sized and trimmed to 7.5, IMR 3031 and Sierra 150 gr. FMJBT game kings. I'll shoot them in the next few days and post how they worked, if anyone is interested.

  16. #96
    Brass Trader LEP's Avatar
    Join Date
    May 2014
    Posts
    116
    Feedback Score
    13 (100%)
    Definitely would like to see results. I have 3031 yet to be used and a few French rifles to try it with.
    Load and shoot: 6.5mm (Dutch, Jap., Carcano, Swede), 7x57, 7.35 Carcano, 7.5mm (Mas, Swiss), 303 British, 7.65x53, 7.7 Jap, 7.62x51, 30-06, 8x50R & 8x52R Siamese, 30-40 Krag, 8x57, 7.62x39, 7.62x54R, 8x 56R, 30 Carbine, 450/577 Martini, 300 Win Mag, 45 LC.

  17. #97
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    321
    Feedback Score
    6 (100%)
    I sized 25 .44 Magnum cases.

    I have a bunch of TulAmmo small rifle primers. I've only fired seven rounds that I loaded with them, but they all went bang. Of course, seven rounds isn't close to enough to declare them trouble free. However, even though they are "KVB-223" primers they have soft cups. Therefore, I have read, aren't a good choice for full power .223/5.56/.300 BLK rounds (wish I had known this before I bought them). The 7 rounds I shot were light loads (14.7 gr. of Lil' Gun for .300 BLK), so no issues experienced.

  18. #98
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)
    WarEagleEd,
    My reloading buddy bought a bunch of Tula primers. He has had nothing but problems with them using tried and true NOT overpowered loads. He has had blown primers, primers falling out on ejection and failures to fire. I plan to stick with American made primers to avoid the problems I've seen with my own eyes. Good luck to you with those primers.

  19. #99
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)
    LEP,
    OK, I'll post my results when I get a chance to shoot them.

  20. #100
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Gonna load up 250 of my favorite .357 magnum practice ammo, .38 special 148 grain DEWC rounds. (Just got my Dan Wesson back from the gunsmith. Going to bounce it against my Taurus Model 66.)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check