Page 12 of 12 FirstFirst ... 2101112
Results 221 to 231 of 231

Thread: A new "what are you doing in the loading room today" thread

  1. #221
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    307
    Feedback Score
    6 (100%)
    I removed primers from some .30 Carbine, .300 Blackout, and 7.62 X 39. Also, my Lee depriming die started to get some rust on the decapping pin nut and the top of the die, so I've got those soaking in some Evapo-rust. I'll see how they look in the morning.
    Last edited by WarEagleEd; 03-22-2020 at 06:06 AM.

  2. #222
    Brass Trader
    Join Date
    Feb 2013
    Posts
    170
    Feedback Score
    43 (100%)
    Put some 8mm Nambu together and took the new Nambu out and test fired it. The third time, first the magazine wouldn't stay in when fired, fixed that and I had bought some commercial ammunition and it didn't have enough power to fully cycle the action. Reloads worked like a charm and it was satisfying to have worked through all of the issues.

  3. #223
    Brass Trader
    Join Date
    Mar 2013
    Posts
    692
    Feedback Score
    18 (100%)
    I just got in my latest order of powder, primers, and bullets. Now I just need to clean off my loading bench as I’ve been doing other projects and it seems to become a catch all when that happens.

  4. #224
    Brass Trader
    Join Date
    Feb 2013
    Posts
    170
    Feedback Score
    43 (100%)
    I know the feeling with the bench catch all.

  5. #225
    Brass Trader
    Join Date
    Mar 2013
    Posts
    692
    Feedback Score
    18 (100%)
    It was pretty bad this time. I replumbed all of my hot water lines, so I had pex tools, parts, and hangers laying everywhere.

    Even after cleaning it, it’s not the best and would give some people panic attacks, but it was bad even by my standards this time.

  6. #226
    Brass Trader LEP's Avatar
    Join Date
    May 2014
    Posts
    102
    Feedback Score
    13 (100%)
    Planned to pull down some 22-250 for trade and realized I don't have that collet size.
    Load and shoot: 6.5mm (Dutch, Jap., Carcano, Swede), 7x57, 7.35 Carcano, 7.5mm (Mas, Swiss), 303 British, 7.65x53, 7.7 Jap, 7.62x51, 30-06, 8x50R & 8x52R Siamese, 30-40 Krag, 8x57, 7.62x39, 7.62x54R, 8x 56R, 30 Carbine, 450/577 Martini
    Shoot, but don't reload: 45 ACP, 32 ACP, 380, 9x18, 9x19, 7.62x25, 7.65 Nagant, 16 gauge.
    Load only: 44 Mag, 45-70, 38-40, 45 Colt, 300 Win Mag, 8mm Lebel.

  7. #227
    Brass Trader
    Join Date
    Dec 2016
    Posts
    234
    Feedback Score
    8 (100%)
    Quote Originally Posted by Happyguy View Post
    I know the feeling with the bench catch all.
    It seems like my shop, garage and loading room all operate under the "flat surface rule". If its flat its suppost to have something stacked on it! Right?

    I've been working on my brass stash for a while, a little every day. I actually started last Summer when it was too hot to do much else. And then took off for most of hunting season. Sorting, depriming and polishing. I'm also resizing the straight wall cases. The organization was pretty good, caliber wise, but I had polished brass mixed with unpolished and deprimed brass mixed with some with primers. And jugs and boxes of unsorted brass. I'm using mostly Folgers coffee cans and a Sharpie.
    Last edited by lightman; 03-25-2020 at 08:37 AM.

  8. #228
    Brass Trader
    Join Date
    Feb 2013
    Posts
    170
    Feedback Score
    43 (100%)
    Yeah I use the Kirkland laundry pod containers to store brass that is ready to clean. I had to take some time off from life and now just getting back into doing the things I like and there is a **** pot of brass to clean. David

  9. #229
    Brass Trader
    Join Date
    Dec 2016
    Posts
    234
    Feedback Score
    8 (100%)
    Yeah, I still had lots of stuff that I collected before I retired. I was hopelessly behind. It don't sound like much but I'm really glad to have this project under control!

  10. #230
    Brass Trader WarEagleEd's Avatar
    Join Date
    May 2013
    Posts
    307
    Feedback Score
    6 (100%)
    I removed the primers from about 50 pieces of 7.62 X 39 brass. What was odd is that 6 of them had unfired primers in them. When I removed them the primer pockets were dirty, so the cases had been fired at least once before and a new primer seated into them. Iíve never reloaded a single round of 7.62 X 39 so I donít think that I seated the primers in those cases (one, I donít remember doing it; two, my primer pockets would have been cleaner than that). The cases are Fiocchi and I have used some Fiocchi ammo in this caliber. Unfortunately, my label thatís in the bag with the brass isnít too helpful. All it says is ďFiocchiĒ and the number of pieces. So, I initially thought this was brass that I had fired, but I now think itís brass that I received in a trade. What do yíall do with live primers like this, render them inert?

    Also, I was removing the primers with the Harvey depriming tool. I enjoy this tool as I can decap/deprime pretty much anywhere. I was processing the brass mentioned above while in the yard watching the kiddo play. One issue I do have with it is that the caseís flash hole can not be obstructed or the case wonít slide far enough down the depriming pin to fit into the body of the tool. Unless the obstruction is cleared, that case can not be deprimed by the Harvey tool. Usually I whack the case mouth against a suitable surface to dislodge the debris. But these 7.62 X 39 cases has some other issue, as a whack didnít clear the flash hole. Nevertheless, I was able to deprime all but one of the cases. I had to use my newly cleaned Lee decapping die in the press to remove that primer.

  11. #231
    Brass Trader
    Join Date
    Mar 2013
    Posts
    692
    Feedback Score
    18 (100%)
    I have the frankford arsenal hand decapper. It works well for doing the occasional case, but I don’t use it for large amounts of depriming, that’s where the new lee APP shines.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check