Results 1 to 10 of 10

Thread: '06

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)

    '06

    I tumbled 100 30-06 LC '69 once fired cases. I'm getting ready to load for my new to me 1955 all matching M1 Garand. I was wondering if anyone has a load that emulates M2 ball using these military cases and Sierra 150 gr FMJBTs. Looking at a number of different loading manuals I think either 49 Grs of IMR 4064 or 48 grs of IMR 4895 will be close. What say you all?
    Dave

  2. #2
    Brass Trader
    Join Date
    May 2013
    Posts
    320
    Feedback Score
    6 (100%)
    FWIW, the Hornady reloading manual has a section specifically for the M1 Garand. It lists 6 powders for the 150-155 grain range, H335; Accurate 2495; Accurate 2520; Vihtavouri N-135; Varget; & H4895. H4895 and IMR4895 are pretty close, if not the same, and the Hornady manual lists the max charge for H4895 at 46.4 gr.

  3. #3
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Beat me to it, I was going to tell him to get the Hornady manual. Anyways, I have it, do you have a favorite powder on hand? I use Hodgdon H4895.

  4. #4
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Yup, 48 grains of 4064 is really good with 150 grain bullets.

  5. #5
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)
    Thanks for the replies guys.
    I do have access to the Hornady manual. What I was wondering is what people are settling on for a load. My thoughts are, I'd like to start my load workup with a load that directly emulates the M2 ball loads in a Garand. Then I can tailor that load to my rifle. So I guess my question is, what loads are you using to emulate M2 ball?

  6. #6
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    Here's what 48 grains of 4064 looks like from a 24 inch barrel when I use the quickload ballistic calculator.
    It says pressure is 49,000 psi, velocity is 2785 fps, kinetic energy is 2584 fpe, 97.81% of the powder is burned, the muzzle pressure is 7934 psi and the case capacity is at 95.8%


  7. #7
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)
    Wow SafetyJoe, Thanks loads for the screen shot and taking the time to do it!
    That tells me all I needed to know for IMR4064.
    Do you think I could impose on you to post a screen shot using IMR4895 and Sierra 150 FMJBT, to get around 2800fps?

  8. #8
    Brass Trader SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    240
    Feedback Score
    13 (100%)
    48.1 grains, chamber pressure is lower, but muzzle pressure is higher than 4064 and case capacity is 5% lower
    Last edited by SafetyJoe; 04-05-2018 at 06:43 AM.

  9. #9
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Well crap, I don't rightly remember, and my loads are out in the shed. Off the top of my head I am thinking 45 grains of H4895 with a 150 grain projectile. I'll check them later.

  10. #10
    Brass Trader DaveL's Avatar
    Join Date
    Aug 2013
    Posts
    41
    Feedback Score
    1 (100%)
    Thanks again SaftyJoe, I very much appreciate your taking the time.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check