Page 1 of 2 12 LastLast
Results 1 to 20 of 32

Thread: My Trades -- SafetyJoe

  1. #1
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)

    My Trades -- SafetyJoe

    I'm wanting to trade these reloadable brass cases. I'm looking for boxer primed brass 7.62x39, 10mm AUTO, 45-70 Govt., 6.5 Grendel, 45 GAP and 32 acp that are in good condition. Good condition means the brass is not cracked, heavily dented, corroded or tarnished and can be reloaded several times. With that being said, once fired brass is still preffered.

    Because I've been asked numerous times in the past, 7.62x39 is NOT the same as military 308 winchester which is 7.62x51 NATO.

    In addition to wanting the above listed calibers I will consider trading for other calibers if you want some of my brass 380 acp, 9mm, 40 S&W, 223 Rem, 243 Win, 30-30 Win, 30-06 sprg or aluminum 45 acp.

    All of my brass has been de-primed and wet tumbled clean with stainless steel pins except for the aluminum 45 acp, brass 9mm, some of the 223 & berdan primed casings.

    Some brass has been sized and they will be listed separate from the others.

    Some calibers have also been sorted by headstamp. Lists of those will be at the bottom.

    Trades should be large enough to use a padded flat rate USPS envelope, but larger trades using a medium or large flat rate USPS box are preferred even more.

    HS is an abbreviation for " Head Stamp "

    I have what is listed below:

    --UNCLEANED--
    (50,000+) 9mm brass mixed HS
    (2000) 40 S&W mixed HS
    (2628) 45 ACP Boxer Primed ALUMINUM

    --DEPRIMED, SIZED & CLEANED--
    (8876) 380 ACP
    (2012) 30-06 SPRG
    (1684) 30-30 WIN
    (620) 243 Win
    (117) 270 Win

    --CLEANED & NOT DEPRIMED--
    (725) 223 Federal HS
    (443) 7.62x25 Tok (berdan primed)
    (54) 7.62x38R Nagant Revolver (berdan primed)
    (12) 7.62x54R (berdan primed)

    --DEPRIMED & CLEANED--
    (3000) 45 ACP LPP Federal HS
    (1500) 223 PMC HS
    (775) 223 Federal HS
    (633) 30 Carbine
    (353) 50 AE mostly Hornady HS
    (223) 32 S&W Long
    (221) 300 Win Mag
    (207) 35 Remington
    (194) 9mm Makarov
    (133) 7mm-08
    (123) 6.5x55mm Swede once fired
    (120) 7.62x38R Nagant Revolver PPU HS
    (118) 25-06 Remington
    (117) 7.62x25 Tok (boxer primed)
    (116) 38 Super mostly nickel plated
    (104) 303 British
    (92) 7mm Rem Magnum
    (73) 6.5 Creedmoor
    (55) 22-250 Remington
    (50) 6.5x55mm Swede NEW BRASS Winchester HS
    (50) 32 S&W Short
    (48) 300 Savage RP HS
    (47) 327 Federal Magnum FC HS
    (36) 25-06 converted from 270 mostly WIN HS
    (35) 204 Ruger Hornady HS
    (35) 45 Colt
    (32) 22 Hornet
    (32) 32 H&R Magnum
    (31) 25-06 converted from 30-06 WIN HS
    (28) 22 TCM
    (26) 6.8 SPC FC HS
    (24) 6mm Remington
    (22) 7.62x54R (boxer primed)
    (21) 44-40
    (21) 7.6325mm Mauser PPU HS
    (15) 500 S&W Magnum
    (14) 264 Win Mag
    (12) 30 Luger
    (12) 444 Marlin
    (11) 41 Rem Mag
    (11) 300 Weatherby Mag
    (9) 300 Rem Ultra Mag
    (8) 270 WSM
    (6) 300 Rem SA Ultra Mag
    (5) 7.65x53mm Argentine Mauser
    (5) 280 Remington
    (3) 6.5x52mm Carcano
    (1) 257 Roberts

    ---- Head Stamps Listed Below ----


    --DEPRIMED & CLEANED--
    (35) 303 British Remington HS HS
    (34) 303 British Herter's HS
    (23) 303 British PPU HS
    (12) 303 British Federal HS

    --DEPRIMED & CLEANED--
    (145) 35 Remington Remington HS
    (34) 35 Remington Hornady HS
    (18) 35 Remington W-W Super HS
    (5) 35 Remington Federal HS

    --FULL LENGTH SIZED & CLEANED--
    (615) 30-30 WIN Remington HS
    (570) 30-30 WIN Winchester HS
    (347) 30-30 WIN Federal HS
    (132) 30-30 WIN Hornady HS
    (14) 30-30 WIN PPU HS
    (2) 30-30 WIN Super Speed
    (2) 30-30 WIN Herter's HS
    (1) 30-30 WIN Super X HS
    (1) 30-30 WIN Remington UMC HS

    --FULL LENGTH SIZED & CLEANED--
    (233) 243 WIN Winchester HS
    (164) 243 WIN Federal HS
    (137) 243 WIN Hornady HS
    (84) 243 WIN Remington HS
    (2) 243 WIN Perfecta HS

    --FULL LENGTH SIZED & CLEANED--
    (49) 270 WIN Remington HS
    (22) 270 WIN Federal HS
    (13) 270 WIN Winchester HS
    (13) 270 WIN Super Speed HS
    (11) 270 WIN Herter's HS
    (8) 270 WIN Hornady HS
    (1) 270 WIN Perfecta HS

    --FULL LENGTH SIZED & CLEANED--
    (515) 30-06 SPRG HXP HS ( 67 are from 1977 )
    (487) 30-06 SPRG Remington HS
    (392) 30-06 SPRG Federal HS
    (152) 30-06 SPRG Winchester HS
    (150) 30-06 SPRG PPU HS
    (75) 30-06 SPRG Korean surplus KA 71 & 73
    (60) 30-06 SPRG S&B HS
    (42) 30-06 SPRG FC 30-M1 HS
    (30) 30-06 SPRG Lake City HS
    (29) 30-06 SPRG Nickel Plated Federal HS
    (17) 30-06 SPRG Super Speed HS
    (17) 30-06 SPRG Hornady HS
    (16) 30-06 SPRG Nickel Plated Winchester HS
    (14) 30-06 SPRG Herter's HS
    (9) 30-06 SPRG WRA 53
    (3) 30-06 SPRG PS 83 & 75
    (2) 30-06 SPRG DA 62
    (2) 30-06 SPRG FA 59 Match
    Last edited by SafetyJoe; Yesterday at 09:18 PM.

  2. #2
    Junior Member
    Join Date
    Jul 2015
    Posts
    6
    Feedback Score
    0
    Impressive.

  3. #3
    Junior Member
    Join Date
    Jul 2015
    Posts
    6
    Feedback Score
    0
    And you where mad I didn't send you free brass lol.

  4. #4
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    Nope, I just expected at least a reply to my PM. I saw that you were logged in several times during the day, but you never even gave me the courtesy to reply. That's all I expected and not too much to ask.

    Quote Originally Posted by Bake40 View Post
    And you where mad I didn't send you free brass lol.

  5. #5
    Junior Member
    Join Date
    Apr 2017
    Posts
    18
    Feedback Score
    2 (100%)
    Are you trading or selling your brass? I can use 300- 30 carbine, 94-50ae, 300-30-30 WINCHESTER, 400-45acp lpp federal hs. I am looking for a medium flat rate priority box.
    I do not have any 7.62x39 to trade you though.
    If interested let me know.
    Last edited by HARDSHOOTER; 01-09-2018 at 02:58 PM.

  6. #6
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    Sorry, I'm only looking for trades. What other calibers do you have for trade? Maybe we can work something out since you don't have any 7.62x39 right now. Thanks

    Quote Originally Posted by HARDSHOOTER View Post
    Are you trading or selling your brass? I can use 300- 30 carbine, 94-50ae, 300-30-30 WINCHESTER, 400-45acp lpp federal hs. I am looking for a medium flat rate priority box.
    I do not have any 7.62x39 to trade you though.
    If interested let me know.

  7. #7
    Member Pacomdiver's Avatar
    Join Date
    Feb 2013
    Posts
    88
    Feedback Score
    9 (100%)
    private message sent (had to spell it out to get more than 10 characters required)

  8. #8
    Junior Member
    Join Date
    Apr 2017
    Posts
    18
    Feedback Score
    2 (100%)

    Brass trade from safety joe

    I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

    I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

    All brass has been polished but not deprimed.

  9. #9
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    Thanks for the offer, but I can't really use any of that stuff aside from adding it to my list to re-trade with other people here. I looked to see if you had posted your own thread, but didn't see it. It can't hurt to create one yourself because that will make it a lot easier for others to see what you have and what you want.

    Quote Originally Posted by HARDSHOOTER View Post
    I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

    I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

    All brass has been polished but not deprimed.

  10. #10
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    Actually, on second thought. I might be able to help you with some federal HS lpp 45 acp and 30-30 win, but the 30 carbine and 50 ae I want to hold onto so I can try to use those to get some 7.62x39. I'm sorting out some FC HS 45 acp right now. When I'm done I'll send you a PM about making a trade for your 357 sig and 38 special brass. What's the condition of your 357 sig and 38 special brass? Is it once fired?

    Quote Originally Posted by HARDSHOOTER View Post
    I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

    I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

    All brass has been polished but not deprimed.
    Last edited by SafetyJoe; 01-12-2018 at 02:24 PM.

  11. #11
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    I updated my totals and list of calibers that I'm looking for which now includes 10mm AUTO.

  12. #12
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    I sent a PM to you with a trade offer using my Federal 45 acp LPP and 30-30 Winchester brass.

    Quote Originally Posted by HARDSHOOTER View Post
    I have plenty 223, plenty 40s&w, plenty 38 special, 228 357 sig, 8 30-06, 50 45acp small primer to trade..

    I can use 300-30 m1 carbine brass, 94 50 ae brass, 300 30-30 brass, and ??federal hs 45 lpp.

    All brass has been polished but not deprimed.

  13. #13
    Junior Member
    Join Date
    Apr 2017
    Posts
    18
    Feedback Score
    2 (100%)
    Hello joe::: Here is your tracking number::::::: 9505 5101 4232 8016 0505 60::::::. You should have your package on 1/18/2018. Thanks again. Doug

  14. #14
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    Thanks everyone. I traded away 50 lbs of my nickel plated stuff and updated my list. Next week I'll update it again with the brass I got in this recent huge trade after I deprime and clean the brass. I'm getting some new calibers, but also adding to some I already have listed.

  15. #15
    Junior Member
    Join Date
    Apr 2017
    Posts
    18
    Feedback Score
    2 (100%)
    Hello joe.
    I would like to trade for your 45acp federal hs. Looking for 1,000 pieces. What would you like to trade for that?
    Doug

  16. #16
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    Yeah, sure we can do another trade for 45 acp federal HS brass again, but not right now. Wait a little while so you get a chance to find something else other than 38 special to trade. Thanks

    Quote Originally Posted by HARDSHOOTER View Post
    Hello joe.
    I would like to trade for your 45acp federal hs. Looking for 1,000 pieces. What would you like to trade for that?
    Doug

  17. #17
    Junior Member
    Join Date
    Apr 2017
    Posts
    18
    Feedback Score
    2 (100%)
    Hello SafetyJoe. I have 223 mixed hs and 7.62x39 mixed hs for trade. All cleaned but not deprimed although some are.

    Looking for 44mag, 357 mag, 50ae, 30 M1 Carbine, 30-30, 45 acp federal lpp.

    Sound interesting? I hope your big trade went well.

    Doug
    Last edited by HARDSHOOTER; 02-07-2018 at 11:33 AM.

  18. #18
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    Yeah, my big trade went really well. I just finished de-priming everything and wet tumbling everything. The 270, 30-06 and 243 that I'm going to size have been lubed and I'm getting ready to size them. After that's done and the lube is tumbled off I'll separate them by head stamp and add those to my list along with the many other calibers I got in the trade, but aren't going to size just because I don't have the die for those calibers.

    As far as making another trade with you that's fine, but I already have a 55 gal drum full of 223 that I haven't gone through yet so I'm not really interested in taking on anymore of that caliber right now, but the 7.62x39 you have I might be interested in as long as they are not berdan primed. In this last big trade I did get 121 more pieces of 50 AE, but I haven't updated my list to reflect those new ones yet, but the total count should be 215 now. I'll probably finish going through everything and update my list this weekend or early next week. I'm also going to update my list of calibers I'm looking for to include a few that a friend wants which are 6.5 grendel, 45 GAP and 25 acp.

    Quote Originally Posted by HARDSHOOTER View Post
    Hello SafetyJoe. I have 223 mixed hs and 7.62x39 mixed hs for trade. All cleaned but not deprimed although some are.

    Looking for 44mag, 357 mag, 50ae, 30 M1 Carbine, 30-30, 45 acp federal lpp.

    Sound interesting? I hope your big trade went well.

    Doug

  19. #19
    Junior Member
    Join Date
    Apr 2017
    Posts
    18
    Feedback Score
    2 (100%)

    Brass trade

    Hello joe. My 7.62x39 is boxer brass and not the crappy berdan primed steel cases. When we do another trade

    i would like to do the trade pound per pound if that works for you. I have all my brass in seal a meal bags. I

    thought it might make it easier instead of counting each piece of brass. Medium size priority flat rate box is

    what i am thinking of sending. Ok by you?

  20. #20
    Senior Member SafetyJoe's Avatar
    Join Date
    Jan 2016
    Posts
    138
    Feedback Score
    9 (100%)
    I'm not too sure if I like the idea of trading pound for pound because some calibers have a much higher value than others. If we were only trading stuff like 9mm and 40 S&W then it might be a good idea. I'm a little too OCD about some things and counting brass is one of them.

    EDIT: However, none of that is to say weighing brass to determine the approximate count is a bad idea. I did that to the 45 acp and 380 acp brass I have that's listed. I just don't think trading based 1 lb of brass for 1 lb of brass will always be fair.

    Quote Originally Posted by HARDSHOOTER View Post
    Hello joe. My 7.62x39 is boxer brass and not the crappy berdan primed steel cases. When we do another trade i would like to do the trade pound per pound if that works for you. I have all my brass in seal a meal bags. I thought it might make it easier instead of counting each piece of brass. Medium size priority flat rate box is what i am thinking of sending. Ok by you?
    Last edited by SafetyJoe; 02-08-2018 at 02:50 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check