Results 1 to 5 of 5

Thread: 44 Mag cases: vertigree tarnish

  1. #1
    Brass Trader
    Join Date
    May 2013
    Posts
    320
    Feedback Score
    6 (100%)

    44 Mag cases: vertigree tarnish

    I have these .44 Mag cases (and some live ammo) that have been stored in a leather ammo belt for 30+ years and have a green, vertigree-like tarnish on them. Are these safe to reload/shoot or has the integrity of the brass been compromised beyond the point of safe use. I'm not concerned about cleaning them, that isn't the issue. I just don't want to put any effort into them just to have a large number of them fail after the first firing.

    44MagCases.jpg

    Ed

  2. #2
    Senior Member
    Join Date
    Mar 2013
    Posts
    122
    Feedback Score
    1 (100%)
    If they are not pitted they should be good.

  3. #3
    Member GRUMPA's Avatar
    Join Date
    Feb 2013
    Posts
    38
    Feedback Score
    3 (100%)
    If I were you, I would clean them and closely look for signs of pitting in the brass. Normally when I see pits I toss them, if not I use them. We all know those aren't on the endangered case list and aren't that expensive to replace.

  4. #4
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Yup, if after polishing you see only smooth metal sides you should be good to go. If it is really really tarnished it would take like wet rotary tumbler with stainless steel media to get it totally back to all nice shiny metal with no tarnish spots.

  5. #5
    Administrator DukeInFlorida's Avatar
    Join Date
    Feb 2013
    Posts
    248
    Feedback Score
    5 (100%)
    I recently processed about 600 44 magnum cases, all matched headstamps, which were stored in a very damp reloading room. They were green all over.

    I popped all the primers out as a first step.

    Ran them through an ultrasonic cleaner for two cycles. Then, ran them through my vibratory tumbler with walnut shell media. Then, ran them again in crushed corn cob media.

    They came out looking like factory new brass! No pitting, no dangers.

    Administrator - Ammo Brass Trader
    NRA Life Member
    NRA Certified Metallic Cartridge Reloading Instructor

    Author of a book on reloading
    ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
    NRA RANGE SAFETY OFFICER


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check