Results 1 to 19 of 19

Thread: How Many People Are Weird Like Me

  1. #1
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)

    How Many People Are Weird Like Me

    I actually prefer nickel plated brass to brass brass. Number one it's just so shiney, and easy to pick out from other brass at the range, I lose less of it. Second, they don't tarnish anywhere near as fast in the hot humid weather we get here on the Southern Gulf Coast. I have never noticed they don't last as many reloads than brass brass that others claim. My dies seem to handle them quite well. What's not to like?

    Trade me any Nickel plated you get for the same amount of brass if I have that caliber!

  2. #2
    Junior Member
    Join Date
    Sep 2013
    Posts
    7
    Feedback Score
    3 (100%)
    Gandog, I too prefer nickel cases. I load all my HP bullets in nickel and all my target stuff in brass with the pistol cal. The rifle I will go out of my way to trade for nickel cases. Basically for the same reason, the nickel rifle cases are always loaded with my "Special" loads and brass are my target and practice rounds. I have several hundred nickel cases in 40 cal and some in 38 if your interested. I can take a look at what I would need for them as far as trade, right now I am brass rich and projectile poor

  3. #3
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Quote Originally Posted by Gotammo View Post
    Gandog, I too prefer nickel cases. I load all my HP bullets in nickel and all my target stuff in brass with the pistol cal. The rifle I will go out of my way to trade for nickel cases. Basically for the same reason, the nickel rifle cases are always loaded with my "Special" loads and brass are my target and practice rounds. I have several hundred nickel cases in 40 cal and some in 38 if your interested. I can take a look at what I would need for them as far as trade, right now I am brass rich and projectile poor

    Hmm, just got a shipment of 500 .40 cal 185 grain Precision Bullets FRN moly coated projectiles. Also have them in 125 grain and 115 grain in 9mm...interested?

  4. #4
    Brass Trader
    Join Date
    May 2013
    Posts
    320
    Feedback Score
    6 (100%)
    I haven't run across much nickle-plated brass. Probably 98% of my brass is, well...brass. I do have some .40 S&W nickle plated brass, but I don't even reload for that caliber, yet. However, I won't have any misgivings reloading the nickle plated stuff when the time comes.

    Ed

  5. #5
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Quote Originally Posted by gandog56 View Post
    Hmm, just got a shipment of 500 .40 cal 185 grain Precision Bullets FRN moly coated projectiles. Also have them in 125 grain and 115 grain in 9mm...interested?
    I'm interested in the .40 bullets

  6. #6
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Quote Originally Posted by Mbaker78 View Post
    I'm interested in the .40 bullets
    Yeah, but do you have nickel plated brass?

  7. #7
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Quote Originally Posted by gandog56 View Post
    Yeah, but do you have nickel plated brass?
    Only the stuff I got from you

  8. #8
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Well, they aren't that expensive, and the prices include the shipping. Check them out at http://www.precisionbullets.com/

  9. #9
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Might have to try some out... When I get money

  10. #10
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    I just traded 300 of mine, but I have an order in for 500 more.

    Which is good, since Midway has shipped me 500 new nickel plated 10mm cases. Supposed to arrive tomorrow.

    And I just got an email the 500 projectiles more has been shipped.
    Last edited by gandog56; 09-20-2013 at 09:24 PM.

  11. #11
    Brass Trader
    Join Date
    Feb 2013
    Posts
    33
    Feedback Score
    1 (100%)
    Quote Originally Posted by gandog56 View Post
    I actually prefer nickel plated brass to brass brass. Number one it's just so shiney, and easy to pick out from other brass at the range, I lose less of it. Second, they don't tarnish anywhere near as fast in the hot humid weather we get here on the Southern Gulf Coast. I have never noticed they don't last as many reloads than brass brass that others claim. My dies seem to handle them quite well. What's not to like?

    Trade me any Nickel plated you get for the same amount of brass if I have that caliber!
    I love nickel plated brass (although not wild about SPEER anything whether it's brass or nickle). I usually have no problems out of nickel plated but recently I received some "once fired" FC headstamp 7mm Weatherby that peeled off about 1/2" of the nickel right above the band when I resized them. I'm not sure why unless the chamber they were shot out of was really oversize (I definitely had enough case lube on them).

  12. #12
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    I've had very few nickel plated rifle cases. Have some in .270. Had some in .223, but somebody wanted them SO bad I gave in and traded them away.

  13. #13
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Quote Originally Posted by gandog56 View Post
    I've had very few nickel plated rifle cases. Have some in .270. Had some in .223, but somebody wanted them SO bad I gave in and traded them away.
    Thanks for that, by the way

  14. #14
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    What did you end up doing with them? What recipe/bullets you use?

  15. #15
    Senior Member
    Join Date
    Jul 2013
    Posts
    132
    Feedback Score
    8 (100%)
    Quote Originally Posted by gandog56 View Post
    I actually prefer nickel plated brass to brass brass.
    Most people are weird, but I don't think anybody is weird like you gandog. If liking nickel brass makes people weird, then count me in. Most cals, I don't have enough to mess with, but some, I could swim in it.

  16. #16
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Quote Originally Posted by gandog56 View Post
    What did you end up doing with them? What recipe/bullets you use?
    Nothing yet due to the scarcity of components in my area, but they are going to be loaded subsonic as soon as I find a good subsonic recipe for 69gr SMKs... Any suggestions?

  17. #17
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Nope, I load Uberwarpspeed for my .223. 50 and 55 grain.

  18. #18
    Brass Trader
    Join Date
    Mar 2013
    Posts
    704
    Feedback Score
    18 (100%)
    Bummer, I just ordered 500 69SMKs... Most will be full power (2950-3000fps), but I'd like to try some subs with it... My 8" twist AR should still stabilize then at 1000fps (I hope)

  19. #19
    Senior Member
    Join Date
    Feb 2013
    Posts
    958
    Feedback Score
    37 (100%)
    Oh boy. My shipments of the 500 10mm Nickel plated Starline cases and my 500 .40 cal 185 grain Precision Bullets projectiles are both in!

    To the bat reloading cave, Robin!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check