Search:

Type: Posts; User: b2lee

Page 1 of 4 1 2 3 4
Results 1 to 25 of 82

Search: Search took 0.00 seconds.

  1. Sticky: I was wondering when you would go from vBulletin...

    I was wondering when you would go from vBulletin 4.2.5 to the 5.x version. It is a major upgrade...and silly little stuff can cause some problems. I don't think you rely on most of the stuff that...
  2. I loaded 3 rounds of 300BO with Lil' Gun and a...

    I loaded 3 rounds of 300BO with Lil' Gun and a Lee 309-230 powder coated red......and 1 round of 308 with Varget and a 168gr everglades match....just because I can't stand brass to be laying around. ...
  3. I purchased some 45ACP mags that were used police...

    I purchased some 45ACP mags that were used police trade ins. Two had a slight amount of spot rust and I cleaned that...oiled them....disassembled and cleaned the springs and followers. Going to the...
  4. Just finished up loading 100 300PRC with some...

    Just finished up loading 100 300PRC with some 230gr Hornady A-Tips. Using Retumbo powder I got a load going over 3000fps with minimal pressure signs. The accuracy on this node is stupid good...and...
  5. Reloading room has me all giddy tonight...I think...

    Reloading room has me all giddy tonight...I think these things are sexy.

    https://i.imgur.com/k3w99dh.jpg
  6. Wednesday I finally got to shoot my new 300PRC...

    Wednesday I finally got to shoot my new 300PRC build with factory Hornady 225gr ELD Match......Just setting up the new MDT ACC chassis and sighting in the scope....seeing how she feels. Shot just 25...
  7. I have the same Lee Bench Primer....actually I...

    I have the same Lee Bench Primer....actually I have just about every hand primer you can name...but personally I think if you seat the primer with two fingers on the end of the lever...you can really...
  8. Thread: 9mm

    by b2lee
    Replies
    12
    Views
    1,038

    Forum: Brass Trading

    It's a 40 MilliHenry Inductor....however...I...

    It's a 40 MilliHenry Inductor....however...I don't know how to reload them :)
  9. poured about 1k of the Lee 230gr truncated cones...

    poured about 1k of the Lee 230gr truncated cones in 45acp....in the process of powder coating them now....need to get by the range and do some actual shooting...but the weather on my off days has...
  10. Yep...I drive the 45mins or so up there to West...

    Yep...I drive the 45mins or so up there to West Chester. I hand prime my accuracy stuff...for plinking and 300blk...it's going to either get the Hornady LNL AP or the Lee Bench Primer.... the 308...
  11. heh...I hope you didn't go to my Cabelas...I just...

    heh...I hope you didn't go to my Cabelas...I just cleaned them out of CCI SRP, LRP, LPP, and SPP...

    Anything that goes through the progressive press gets CCI...they machine the best...with the...
  12. Just buy a 9mm barrel. With the M&P 40 you can...

    Just buy a 9mm barrel. With the M&P 40 you can simply drop in a new barrel and run the same magazines...everything works great except that last round may not feed....depends on the mag though. I...
  13. Pouring 124gr 9mm, 230gr .308 for 300blk...

    Pouring 124gr 9mm, 230gr .308 for 300blk subsonic, 45 Auto.....powdercoating everything.....sizing....and then load everything up.

    My goal today is to not have a single piece of loadable brass...
  14. Well it seems it will rain today in N. KY...so...

    Well it seems it will rain today in N. KY...so I'll load up some 223. Yesterday I cranked out a few thousand boolits I swage'd from 22lr. Some 60gr I made from a set of Corbin dies. I only have...
  15. Sorry to hear that Mbaker78.

    Sorry to hear that Mbaker78.
  16. heh...if they did breed....I'd put a few of each...

    heh...if they did breed....I'd put a few of each caliber in a warm and soft ammo can in a dimly lit area and let them get to making babies. If I put a 45 and a 9mm in a can...will I get some baby...
  17. Sounds good lightman....I've been in the shop...

    Sounds good lightman....I've been in the shop pouring cores for 224. Earlier today I annealed about 2k pieces of 22lr brass that I de-rimmed yesterday....was more of a wash/anneal/de-rim/wash...
  18. Replies
    13
    Views
    1,445

    Forum: Brass Trading

    Actually...I think they would be great 30-30...

    Actually...I think they would be great 30-30 bullets...here are the exact bullets: https://www.evergladesammo.com/bullets/rifle-bullets/308-150gr-plated-fmj-bullets.html
  19. Replies
    13
    Views
    1,445

    Forum: Brass Trading

    What type of .308 bullets you looking for? I...

    What type of .308 bullets you looking for?

    I have some 150gr plated .308 that I originally bought to run subsonic in my 300blk...but they don't like to be magazine fed and like to jamb on the feed...
  20. Thread: My Collection

    by b2lee
    Replies
    16
    Views
    4,770

    I've been thinking of simply hotmelting a magnet...

    I've been thinking of simply hotmelting a magnet to the side of a brass case and attaching it where ever on my metal wall storage cabinets.
  21. I have a S&W M&P 45...and the 9mm...and the...

    I have a S&W M&P 45...and the 9mm...and the 40S&W...and the 22LR pistol...heh..the whole family...but anyway...on that 45 the feed ramp is a very nice smooth scoop and yes..they feed great due to...
  22. Got bored in the afternoon and fired the lead pot...

    Got bored in the afternoon and fired the lead pot up again... this time some 240gr boolits to feed the 45ACP. Poured 366 before my hands got tired of holding a six cavity. Sized, 1 coat powder...
  23. Since it was raining all day....on my day...

    Since it was raining all day....on my day off....I decided to pour some 230gr 45ACP semi wadcutters....new mold...took about 10 pours to get them looking good...but they turned out great....going to...
  24. I have an old CH Cannelure Tool that I use. The...

    I have an old CH Cannelure Tool that I use. The Chuckbuster looks better.

    I anneal the same way...with my second Lee pot. I was using a fireplace popcorn popper for the longest time.

    On...
  25. I ended up doing a shallow XTP cut and a nice...

    I ended up doing a shallow XTP cut and a nice roll over on the base...made 500+ today...I like the nickle plated ones the best...here are two of them

    326
Results 1 to 25 of 82
Page 1 of 4 1 2 3 4
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check