PDA

View Full Version : 62gr non-steel core 223rem



Mbaker78
04-17-2015, 12:38 PM
Anyone have any good load data using IMR4064? Going by Hodgdons site and my Lee manual I've found some decent starting points, but on the hodgdon site they only have a SFT SCIR bullet listed in 62gr with a lower charge and velocity, but have a SP bullet listed in 63gr with a higher charge and velocity. So I'm going off of the lower end of the 63gr data and working up, as I've done previously with other powders (H335, BLC-2), I was just wondering if anyone had any known good load data that they'd be willing to share.

I know, I know, use other people's data at your own risk, work up to it, etc...

Thanks.

62chevy
04-17-2015, 03:58 PM
I know, I know, use other people's data at your own risk, work up to it, etc...

I think that about sums it up and is what I did with the .380 and that new Lee bullet. When that worked sort of someone with Quick loads came to the rescue with a max load for that bullet and my OAL.

Maybe someone will do the same for you.

Mbaker78
04-17-2015, 07:49 PM
My test set right now is 23.8gr, if I get a chance to make it to the range I'll know for sure how they do...