PDA

View Full Version : Pacomdiver- brass to trade- edited trades



Pacomdiver
02-03-2013, 09:57 AM
have some brass to trade, ill add more as i dig them out.



30-30 nickel 1x fired, -50

35 rem -4 hornady

500 s&w mag- 28

9mm luger -3k plus mixed

380 auto- 3K plus mixed

30-06 nickel - 4 FC

338 ultra mag - 11

7mm mag- 59

32 h&r- 11

308 black hills match -1x fired- 29

8x56rs - 12 pcs PPU

44 COLT(not 45 colt) 26 pcs starline

222 mag- 19pcs rem

222- 11pcs 10 rp, 1 ppu

223(5.56) mixed military/commercial brass- 3K+

30 carbine berdan primed- 169- could be used for jackets



COMMERCIAL BULLET JACKETS 153 .223 x.710 and 4 .243 x .877





trades wanted for above

50 beowulf brass and bullets, 308 diameter RNFB bullets 150 to 220g ,.308 diameter bullets 120g-220g for 300 blackout, 168-220g .308 BTHP match bullets (berger VLDs, matchkings, amax, hornadys, etc ), .308 fmj bullets 147-150g , 55-62g .223 fmj or VMAX bullets, 68-90g .223 match bullets, .311 125g fmj, .311 147g-182g fmj bullets, .366 spritzers 250 or 286g , preferably with boattail, 9mm 115g fmj (plated prefered), .451 230g fmj (plated prefered), 338 lapua brass and bullets (250g or 300g smk or scenars preffered), x54 boxer brass, 8mm mauser brass and .323 bullets, 303 british cases and bullets, x39 boxer brass, 308 Lake City cases, .277 130g nosler ballistic tips, .429 44mag 240g hp bullets , 30 carbine bullets

Boolet molds
12g slug mold, 20g slug mold, 8mm mauser (.323,.324,.325) mold, 4 or 6 cavity preferred, 308, 310, 311, 312, 314 or 316 diameter cast boolet molds 125-200g, lyman # 311041, 311291, 311299, 314299, 45 and 45LC cast boolet molds, prefer 4 or 6 cavity ,44 mag 240g double or six cavity molds,

lyman bullet sizing dies for 450/4500: 224,225,312,313,324,325,451,452 and top punches 284,413

swaging dies for 308 hp or fmj swager and 40 to 45acp swager,

ar15 parts and mags, ar10 parts and mags, rem 700 parts, m1 carbine 30 rnd mags

scottarthur
02-03-2013, 02:21 PM
PM sent on old site.

Scott

rbuck351
02-11-2013, 09:08 PM
I have 308LC and x39 boxer. I'm interested in the 444brass if you don't make the trade.

gandog56
02-12-2013, 07:55 PM
What do you mean by swager? Bullet or crimped primer hole swager.

Bake24
02-19-2013, 04:42 PM
How many 22 hornets do you have

Pacomdiver
02-23-2013, 07:45 PM
added 9mm win mag brass

Bake24
02-23-2013, 07:54 PM
I have 50 30 carbine brass primed would like to make a deal let me no if your interested

Bake24
02-23-2013, 07:57 PM
Plus 10 44 mag brass

Pacomdiver
02-23-2013, 09:51 PM
bake,
what are you interested in?

Bake24
02-24-2013, 09:39 AM
7 wsm , 32-20 ,32 win 256 win 22 hornet 7mm express 450

chuck 58
03-01-2013, 09:28 AM
I am interested in your swaging die for 223 308 and 45. and any 223 308 and 45 bullets you have. What are you looking to trade for?

M Hicks
03-01-2013, 09:54 AM
I think he wants the swaging dies Chuck. Not positive but pretty sure he wants to trade what is at the top of his OP for stuff at the bottom.

chuck 58
03-01-2013, 12:11 PM
Yea looks that way. I just got excited.

Pacomdiver
03-03-2013, 05:17 PM
yeah alot of people dont spend the time to read it right

Pacomdiver
03-16-2013, 07:07 AM
totals adjusted and some new brass added

Pacomdiver
03-18-2013, 06:22 PM
added 223 primed cases and adjusted totals

Pacomdiver
04-02-2013, 07:03 PM
totals adjusted

Mathew
04-16-2013, 08:23 AM
PM Sent 4/14

Pacomdiver
04-24-2013, 06:23 PM
updated totals

Pacomdiver
05-16-2013, 07:07 PM
totals edited

Pacomdiver
06-12-2013, 04:47 PM
adjusted totals and trades

20guage1
06-15-2013, 07:36 AM
Tony, no sales of brass are allowed here.

Pacomdiver
02-16-2014, 03:08 PM
totals updated

gandog56
02-17-2014, 06:15 AM
I have Nosler 230 grain .45 JHP's.

Would want the 357 SIG, .44 specials, and maybe 100 of them .45's. How many projectiles you want for that?

Pacomdiver
02-23-2014, 08:47 AM
honestly i dont shoot that much hollow point, mainly fmj

gandog56
02-23-2014, 01:02 PM
honestly i dont shoot that much hollow point, mainly fmj

Ummm, why? You just punching paper? (Pretty much what I do, but I got a deal on these HP's.)

ricky
02-23-2014, 02:31 PM
totals edited

Still have the 450 marlin? I have 308 bullets and 223 bullets

Pacomdiver
02-25-2014, 05:11 PM
gandog, yes paper and steel plates.

ricky, yes i still have them , interested in anything else?

ricky
02-26-2014, 04:56 PM
pacomdriver pm send

gandog56
02-26-2014, 05:58 PM
How about 9mm 115 grain Precision Bullets with the moly coating?

76

Pacomdiver
03-19-2014, 02:48 PM
gandog,
are those 9mm jacketed or lead?

fatboy
03-20-2014, 07:42 PM
pacomdiver, I am interested in your 35 rem and your 45 long colt, I have some 44 mag and .311 bullets I will pm you with details.

gandog56
03-21-2014, 05:25 AM
They are a lead bullet coated with a proprietary coating, probably mostly moly, which give them a black finish look. I use them because they are cheap, they do not lead the barrel, and his prices include the shipping. Check out his web page and see what happened when he put a blow totch to the bullet.

http://www.precisionbullets.com/

Pacomdiver
03-23-2014, 07:28 AM
gandog pm sent

Mbaker78
03-25-2014, 04:13 AM
PM sent....

Pacomdiver
04-17-2014, 07:32 PM
adjusted totals

MRBACKHAND
04-24-2014, 10:24 PM
Pm sent for 40 brass

Pacomdiver
05-21-2014, 05:20 PM
edited totals

Pacomdiver
10-19-2014, 08:24 PM
totals edited and brass added

Pacomdiver
11-11-2014, 07:26 PM
added more brass

rbuck351
11-12-2014, 07:12 AM
I am interested in: 32S&Wlong (50), 22H (3), 30mau (5), 25/20 (5) and 35Rem (14). I have x39 boxer,44mag and I think 308LC. How much of what would it take for those listed?

Mbaker78
11-12-2014, 01:48 PM
I'd still like the 50 beowulf, but just to add to my collection...

Shooterontheline
11-13-2014, 11:34 AM
How many 357 bullets would it take to trade for the 32win sp cases?

Pacomdiver
11-15-2014, 05:37 PM
rbuck, replied to your pm

mbaker, i'll check if I still have them, I don't remember seeing them last time I was digging thru the brass box

shooter, you interested in any others to make shipping worthwhile?

Shooterontheline
11-18-2014, 01:00 PM
Sent PM…..

Pacomdiver
12-19-2014, 05:54 PM
adjusted totals

oldsagerat
01-02-2015, 04:39 PM
About the -

6mm rem= brand new sealed bag of 50 winchester brass- grabbed wrong bag

PM sent.

Pacomdiver
01-26-2015, 04:41 PM
edited traded brass

Pacomdiver
03-15-2015, 04:09 PM
totals updated

Pacomdiver
09-13-2015, 09:55 AM
bump, new brass added

Pacomdiver
11-01-2015, 02:15 PM
bump to the top

Pacomdiver
11-28-2015, 04:30 PM
added more brass

Shooterontheline
12-01-2015, 08:48 AM
Pacomdiver,
We didn't hookup a while back so here we go again. I'm interested in your 45acp SMALL primer case and the 30 carbine cases. I have a bunch of 357 plated bullets in 124gr weight.

Let me know a trade ratio.... Marko

Pacomdiver
12-16-2015, 03:49 PM
added more brass and adjusted trades

Pacomdiver
02-20-2016, 04:34 PM
edited brass totals

Pacomdiver
07-20-2016, 04:47 PM
updated totals

El Matavenados
08-21-2016, 09:03 PM
I have (17) 7.62.54r S&B stamped brass, and (5) 30 carbine (2 are pretty dirty/corroded). Also, (50) 100gr round nose 30 cal bullets. They look kind of like a cast boolet with a large cup (not like a jacket, though). They were factory made, I believe for the 30 carbine.

Finally, I have a Lyman 2660410, which is a 311410 130-gr boolet for the 30 carbine, with original box. It was used only once, but I left it on the table in the garage, and it has a lot of light surface rust on the outside. One of the cavities has a small spot of surface rust.

Would you take all of the above in trade for the (26) 300 WM cases and (700) 223 cases? Or make me a counter-offer?

Shooterontheline
08-23-2016, 04:07 AM
Pacomdiver,
I have a bunch of 30 Carbine in brass and nickel available (all once fired). I am looking for 6.5x55 mauser and 45acp small primer cases. What kind of trade can we do?

Pacomdiver
09-07-2016, 05:56 PM
el matavenados, pm sent

shooter, i have enough 30 carbine cases already, only cals i could use more of are 762x54 and 8mm mauser cases




added a couple cals and adjusted totals

Pacomdiver
11-29-2016, 03:44 PM
updated totals

Pacomdiver
01-11-2017, 05:41 PM
bump, edited totals and added 300 b/o trades

LEP
01-16-2017, 09:08 AM
Interested in the 308 R-P cases, Swede and Swiss boxer brass, and 300 Win Mag Brass.
Believe I have 147 gr 311 bullets, 110 gr 30 carbine bullets, and maybe some LC 308 brass I could trade.

cowboybart
01-20-2017, 09:22 AM
Interested in the 6.5x55, some 45 ACP and maybe 308.

I have Nosler 130 gr bullets, a few 303 Brit cases and some 5.7x28 that I traded into for swaging into 30 cal bullets. I'm not gonna go the swaging route.

Pacomdiver
02-06-2017, 02:37 PM
added 9mm mak brass

Pacomdiver
04-04-2017, 12:49 PM
more brass added including 10mm and 7mm mag

n10sivern
04-11-2017, 08:16 PM
30-06 PPU- 141pcs 1x fired
6.5 x55 Swedish mauser- 20 pcs PMC
45acp large prime- 1k+

I'm interested in the above

45 Anything
08-11-2017, 06:50 AM
PM on the way

45 Anything
08-11-2017, 08:12 AM
I keep getting error messages when I try to send a PM. Anyway, I happen to have a Corbin 4 cavity adjustable mold I'm no longer using. I used the hell out of it but it still works just fine. I also have a few thousand empty Federal 22LR brass, I sorted them by brand and wet tumbled them so they're all clean and i'd say 99%+ are Federal (i'm sure there are a few odd stragglers in there).Let me know what you think, I can sure send some pictures of the mold too.

cowboybart
08-11-2017, 10:10 AM
I have a box of Hornady .311" 123gr Soft Point bullets and 17 pcs of 303 Brit brass

Interested in 308, 300 WM and 6.5x55

cowboybart
08-11-2017, 10:10 AM
I have a box of Hornady .311" 123gr Soft Point bullets and 17 pcs of 303 Brit brass

Interested in 308, 300 WM and 6.5x55


I'm guessing the PM system is not working as it double tapped in the thread instead of sending it as a PM.

Pacomdiver
10-15-2017, 10:35 AM
totals adjusted and new brass added

LEP
10-16-2017, 06:57 AM
Interested in 300 Win Mag & 6.5x55. Have to see if I have anything you can use, first.

gandog56
11-08-2017, 06:20 AM
I sent you a PM.

Pacomdiver
01-27-2018, 09:10 AM
totals adjusted

cowboybart
01-28-2018, 07:42 AM
Still interested in the 6.5x55 and the 357 Sig brass.

I have .311 123gr SP bullets and 9mm 115gr FMJ (not plated) bullets

Pacomdiver
02-03-2018, 11:17 AM
5 Year anniversary of this post Bump, am cleaning up under my bench, so will be adding more brass as i find it

cowboybart
02-04-2018, 09:39 AM
Happy anniversary. Do you ever respond to posts in this thread?? I posted just above (and below) with no response.

Pacomdiver
02-04-2018, 12:02 PM
never got any pms from you making an offer, a brass trade should at least be worth more than shipping cost so there is some benefit to a trade

Pacomdiver
05-21-2018, 03:42 PM
totals adjusted

Pacomdiver
07-01-2018, 05:48 AM
totals adjusted

Pacomdiver
09-08-2018, 07:05 AM
added brass and adjusted totals

Pacomdiver
01-27-2019, 03:56 PM
totals adjusted

RenoDave
01-27-2019, 09:49 PM
Interested in the 8x56rs - 12 pcs PPU let me dig and see what I have on your want list.

RenoDave
01-28-2019, 09:36 PM
Interested in the 8x56rs - 12 pcs PPU let me dig and see what I have on your want list.

message sent

Pacomdiver
12-06-2020, 08:40 AM
back to the top

seeker
12-06-2020, 12:47 PM
I sent you a pm

Mbaker78
12-06-2020, 10:52 PM
Sending PM....

renofish
03-26-2021, 07:45 PM
what do you have in jackets to trade ‽